Sealed CO2 laser cooling specs
Posted: Mon Oct 10, 2011 7:39 pm
I've been lucky enough to buy a completely new 80W sealed laser tube locally, being Chinese and second hand there is less than a trace of documentation, so I have no hard data on how to cool it.
I'm hoping someone here can recognize the type and point me at the datasheet:
https://plus.google.com/105359218037313 ... FgYBEUwebb
... or tell me the data for your tube:
* Wattage
* Maximum outlet temperature
* Maximum temperature difference between inlet and outlet
* Minimum water flow.
My current thinking is that the tube is that I need to get rid of around 800 Watt while keeping the temperature difference down to a maximum of 30 deg C when moving at least 4 liters per minute, but getting 800W out of water is hard when the temperature difference between air (22 deg C) and the water is so low.
I'm hoping someone here can recognize the type and point me at the datasheet:
https://plus.google.com/105359218037313 ... FgYBEUwebb
... or tell me the data for your tube:
* Wattage
* Maximum outlet temperature
* Maximum temperature difference between inlet and outlet
* Minimum water flow.
My current thinking is that the tube is that I need to get rid of around 800 Watt while keeping the temperature difference down to a maximum of 30 deg C when moving at least 4 liters per minute, but getting 800W out of water is hard when the temperature difference between air (22 deg C) and the water is so low.