Page 3 of 3

Re: Ball Screws for Laser Y axis

PostPosted: Tue May 15, 2012 6:14 pm
by bdring
In the release I have it did not work for me.

I am not saying this is your problem, it is worth trying.

There are a could of topics on this. Here is one.

viewtopic.php?f=32&t=753

Re: Ball Screws for Laser Y axis

PostPosted: Tue May 15, 2012 8:26 pm
by gavztheouch
Thanks for that, its seems that was causing my screwed engravings. Unfortunetly it has not helped my backlash style issues.

I have taken some photos for reference. All squares were engraved using the y swing option in the dsp. The letters in the 3rd picture were cut using the dsp controller, speeding up or slowing down the cutting process had no effect on the vector cutting but did effect the engrave here are the results.

Image
Speed 1. power 20%. Y swing
Image
Speed 2. Power 20%. Y swing
Image
Vector cut letters
Image
Pen mounted to the gantry speed 1, same as first image. Strangely the lines appear quite well lined up with little if any backlash.