Cyber's DeathStar Build

Post your build logs here

Re: Cyber's DeathStar Build

Postby cybertech99 » Mon Feb 20, 2012 12:39 am

Correct. The pulley has. 7.5mm hole. And the mounts are nema23 so I needed a nema 23 with a 7.5mm shaft.
cybertech99
 
Posts: 35
Joined: Wed Feb 01, 2012 6:07 pm

Re: Cyber's DeathStar Build

Postby cybertech99 » Tue Feb 21, 2012 7:52 pm

Making my own T-Slot Nuts. I don't have any 5mm bolts or nuts around, but I have a lot of 10-32 so I will be making my own L brackets and T-Slot nuts.

Image Image
cybertech99
 
Posts: 35
Joined: Wed Feb 01, 2012 6:07 pm

Re: Cyber's DeathStar Build

Postby whmeade10 » Tue Jul 03, 2012 5:32 pm

Any new progress? :D
FSE 45w Deluxe CO2 Laser 5th Gen w/RetinaEngrave 3D | CorelDRAW X4
whmeade10
 
Posts: 215
Joined: Sat Dec 18, 2010 3:35 am
Location: Sedalia, KY

Re: Cyber's DeathStar Build

Postby cybertech99 » Wed Jul 04, 2012 3:57 pm

Cost has put this on the back burner. I am waiting for my 3d printer to arrive and try to make some t slot parts to encase my laser. But I still need to get 1500 dollars together for the controller, power supply, and laser tube.
cybertech99
 
Posts: 35
Joined: Wed Feb 01, 2012 6:07 pm

Previous

Return to Build Logs

Who is online

Users browsing this forum: No registered users and 2 guests

cron