Page 2 of 2

Re: Cyber's DeathStar Build

PostPosted: Mon Feb 20, 2012 12:39 am
by cybertech99
Correct. The pulley has. 7.5mm hole. And the mounts are nema23 so I needed a nema 23 with a 7.5mm shaft.

Re: Cyber's DeathStar Build

PostPosted: Tue Feb 21, 2012 7:52 pm
by cybertech99
Making my own T-Slot Nuts. I don't have any 5mm bolts or nuts around, but I have a lot of 10-32 so I will be making my own L brackets and T-Slot nuts.

Image Image

Re: Cyber's DeathStar Build

PostPosted: Tue Jul 03, 2012 5:32 pm
by whmeade10
Any new progress? :D

Re: Cyber's DeathStar Build

PostPosted: Wed Jul 04, 2012 3:57 pm
by cybertech99
Cost has put this on the back burner. I am waiting for my 3d printer to arrive and try to make some t slot parts to encase my laser. But I still need to get 1500 dollars together for the controller, power supply, and laser tube.