Time Lapse Rig 01

Post your build logs here

Time Lapse Rig 01

Postby TimeLapseCam » Tue Mar 06, 2012 7:31 am

Maker slide time lapse camera rig

All this great info from a post on Openmoco called miniE or miniEngine got me going

http://openmoco.org/
http://www.farbdoktoren.de/minie/?page_id=67
http://www.farbdoktoren.de/minie/

Hardware
Arduino
DF Robot LCD shield
Proto shield
Sparkfun driver
See the above links for all the details

The Short Story:

Close to final product
Image

Getting the safety, camera trigger, and motor driver all working.

Image

I'm sure this will all fit

Image

Slowly getting under control

Image

Somehow it all fit

Image

Testing the connection to the motor. Used a 4 pin mic jack.

Image

Starting to wire the safety swtches

Image

Close up of the LCD and power switches

Image

Basically done, still need to finish the tripod clamps and do a bit of clean up.

Image

Let me know if you have any questions I can try to help out.
TimeLapseCam
 
Posts: 2
Joined: Tue Mar 06, 2012 3:34 am

Return to Build Logs

Who is online

Users browsing this forum: No registered users and 30 guests

cron