sliptonic wrote:Then I get a bogus cut on my material
bill.french wrote:sliptonic wrote:Then I get a bogus cut on my material
Ben suggested i add a M65 P0 to the start of my gcode.
Modelart wrote:Can you tell me how PP pins 14 and 17 are connected to PSU, for your setup?
BenJackson wrote:...The M3 master means it won't unexpectedly fire the laser at the start of the job, so you have a window for your prologue to set up. If Heeks is moving in X/Y before setting Z clearance or if it's starting the spindle (with M3) before moving to the Z clearance height that's definitely a bug. You can imagine the kinds of problems it would cause with a router or mill as well.
By the way, you can simply jog Z up from Axis before you start your job. If you used my included axisrc (which puts the table U on pg up/dn) then Z is moved to brackets [ ]
Users browsing this forum: No registered users and 61 guests