Re: Assembly questions
Posted: Sat May 28, 2011 2:04 am
Ok, I went through and made a new more detailed table. I looked at the 3d models and my frame for a long time and I do not believe I am missing anything (Although I am sure there are a few). I would recommend adding this document to the build instructions as a single landscape page with the assembly order diagram by itself on the previous page. This way users can print off the two pages and go to work building their frame.
The main difference that my table features is it tells you the total number of t-nuts in the channel and the number of loose t-nuts in the channel on the current step. There are also some other helpful instructions which should keep the user from messing little things up.
Here is the google doc link
Take a look at the file and let me know of any feedback you have. Also let me know if you think I have an error.
The main difference that my table features is it tells you the total number of t-nuts in the channel and the number of loose t-nuts in the channel on the current step. There are also some other helpful instructions which should keep the user from messing little things up.
Here is the google doc link
Take a look at the file and let me know of any feedback you have. Also let me know if you think I have an error.