Fume Extraction

Anything to do with air assist, vacuum tables, fume extraction and related...

Re: Fume Extraction

Postby bdring » Sat Mar 13, 2010 3:31 am

That sure makes a lot of sense.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Fume Extraction

Postby lasersafe1 » Fri Mar 19, 2010 1:14 am

I was reluctant to copy the user manual for the ULS-25 and post it. But now I have found it posted by someone else. I thought it was most relevant to post the link here since we were talking about the fume extraction portion of the manaul. (see section 2.3)

http://www.hltlasers.com/reference/25-50PSRevisionB1.pdf
lasersafe1
 
Posts: 599
Joined: Fri Nov 27, 2009 8:23 pm

Re: Fume Extraction

Postby 3dtech » Fri Jun 02, 2017 5:33 am

I have a similar blower for my woodworking. The flow drops off very quickly with pressure. I find that my shop vac usually does better whenever any backpressure is involved. My shop vac has a lot less flow but can pull almost 30" of pressure. For dust collection on my router, it is no contest. The shop vac kicks its but.

The nice thing about those blowers is that they are relatively quiet. You probably don't need too much flow anyway.
3dtech
 
Posts: 14
Joined: Tue Sep 08, 2015 6:21 am
Location: MONA TILES COMPOUND, NR. CHHANI CIRCLE, CHHANI ROAD, VADODARA - 390002. GUJARAT, INDIA.

Previous

Return to Air Assist/Vacuum/Fume Extraction

Who is online

Users browsing this forum: No registered users and 1 guest