WTB: Laser cut black acrylic panel

[Enraged]

I'd like to buy a black acrylic panel to mount some gauges in my car. I can provide a DXF or DWG for it. I'd like laser cut rather than cnc routered. I can buy a few extra if you want to use a sheet of 12"x24" acrylic. Shipping in a USPS flat rate envelope makes it pretty straight forward.

I'll get the final drawing done this weekend, but the overall size for the part is about 3" x 6", with two ~52mm holes in it. Let me know if you can do it, and how much you would want for the work, shipped to V8R1A2.

[mattrsch]

How thick of material do you need it cut from?

[Enraged]

enough to hold a gauge, so probably 1/8" minimum, but thicker is better if you have some lying around

[Enraged]

Looks like I found someone to do it, thanks guys!