Page 1 of 1
MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 3:14 amby nismobg
Any places or anyone selling closed loop mxl belts and mxl pulleys for 10mm shaft ?
Re: MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 10:41 amby SystemsGuy
Misumi has 'em. Just remember to pick a tooth count that's high enough to allow for a 10mm shaft diameter - so 30 ish?
nismobg wrote:Any places or anyone selling closed loop mxl belts and mxl pulleys for 10mm shaft ?
Re: MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 6:54 pmby nismobg
What about belts , not open ended ?
Re: MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 9:06 pmby greenvandan
Re: MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 9:49 pmby canadianavenger
sdp/si is another source for belts and pulleys
Re: MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 10:36 pmby nismobg
I have checked all those stores but i can not figure out if they are selling open loops belts or closed. I am still a newb in this department that's why the question. Same goes for sdp mxl closest W for belts is 6mm compared to mine which are 6.4mm.
Re: MXL belts and pulleys 10mm bore
Posted:
Sat Jan 19, 2013 10:46 pmby cvoinescu
SDP has two sections on their website, metric and imperial. The 6mm belt would be under metric, the 6.35mm (1/4") under imperial. It's the very first choice you have to make when browsing, and not very obvious.