Page 1 of 1

60W Supply Wanted

PostPosted: Tue May 18, 2010 12:49 pm
by buildsomething
Hey guys, I'm looking for a 60W 120VAC power supply for a chinese CO2 laser. The one that I have is OK but I have to run it on 240VAC instead of 120VAC and thats a bit of a pain for me. The one that I have is one of the originals that didn't have the 120VAC option....

Before I go and start spending more money, I thought I would access this group and see if anyone had a spare one that they might want to get rid of.

Richard

Re: 60W Supply Wanted

PostPosted: Sat May 22, 2010 4:44 pm
by lasersafe1
A simple step-up transformer is probably cheaper than a new power supply. Stepping up 115 to 230 will halve your available current, but I know the 60W supply doesn't need 10 amps.

Re: 60W Supply Wanted

PostPosted: Wed May 26, 2010 1:38 am
by Ben
There was a nice Voltronics CO2 laser power supply for 25-150w lasers that sold on Ebay not long ago. If you’re not in a rush to replace your current PSU, you might check Ebay every so often.

Here’s the link:
http://cgi.ebay.com/Voltronics-CO2-lase ... 2a072d434d