by Bobbylite14 » Tue Apr 05, 2016 10:14 pm
The 2x has been an ongoing project of mine for almost 2 years now, but as close as I am to finishing a recently ran into a money problem and need to part ways with it. Currently I have full movement across all axis, the only thing left to do is wire up the laser tube, and connect the DSP to a computer. All Extrusions and Buildlog parts are included. Here's my part list from LightObject, pictures to follow soon. PM me for more information. Thanks.
1 of: SP 35W CO2 Sealed Laser Tube for Small K40 laser engraving machine
1 of: 20W~45W PWM CO2 Laser Power Supply (AC110V)
1 of: 40W CO2 laser Mirror/ Lens DIY bundle
3 of: 20mm Gold Plated Reflection Mirror
1 of: Improved 18mm ZnSe Focus lens (F50.8mm)
2 of: Laser Reflection Mirror Mount
1 of: 18~20mm Focus lens Mount
3 of: NEMA 17 42HSM03 Dual Shaft Stepper motor
3 of: Mini 2 Phase 1.5A 1-axis Stepping Motor Driver
1 of: DC 24V 15A Switching Power Supply. Good for CNC Stepping Motor Drive
1 of: DC 12V 3A Switching Power Supply. Ideal for small stepping motor or CCTV camera
1 of: AWC608 Commercial DSP CO2 Laser Engraving/ Cutter Controller
1 of: 18mm Capactive Proximity Sensor Switch
10 of: 8X12 Silicon Flex Tube for CO2 Water Cooling
1 of: 1m (3.3ft) Cable carrier join 10x 10mm