Page 1 of 1

Interface Board Ready

PostPosted: Sat Jan 22, 2011 4:46 pm
by bdring
The laser interface boards are ready for sale. They are listed on the parts and kits page. There is complete documentation including all source files on the drawings page. The price is $40. I changed my mind on selling raw boards or kits from this batch. As soon as I sell about 10 of these I will order the next batch and consider it then.

I also have a small quantity of 25mA panel meters now listed on the page.

25ma_meter.JPG

Interface Panel

PostPosted: Sat Jan 22, 2011 9:11 pm
by bdring
The interface panel is done. There is a E-Stop button that is push to stop and rotate to release. There is a manual laser fire button. There is a 5K Ohm potentiometer with a knob. It is sized for the 2.x laser skin cutout. There is a dimensioned drawing if you want to adjust your skin cutout. I will add it to the kits page and drawings page soon.

Below is a picture of all the parts in the kit. You need to supply the wire (22-24awg), wire it per the drawing (or as fits your laser) and make a legend.

intfc_panel_kit.JPG


Below is how it will look when it is done with my cheesy paper legend.

intfc_panel_finished.JPG