Co2 Laser High Voltage plug and wire

Where you can find stuff.

Co2 Laser High Voltage plug and wire

Postby pinoynyc » Mon Apr 14, 2014 8:04 pm

Hi,

Anybod know where I can source this high voltage plug locally? any p/n for mouser or digikey, buidyoucnc sells this too but maybe I can get it cheaper somewhere, i'll be buying more than 5pcs.
http://www.buildyourcnc.com/images/LaserPower1-800.JPG


And also where can I get the the high voltage wires?

thanks again.
pinoynyc
 
Posts: 10
Joined: Mon Mar 24, 2014 9:25 pm

Re: Co2 Laser High Voltage plug and wire

Postby Chankster » Mon Apr 14, 2014 9:03 pm

Here's the wire - http://www.lightobject.com/High-Voltage ... -P748.aspx

Not sure on the plug.
"This is not my sig", it said. - I looked at it suspiciously; Who's sig was it, then?
Chankster
 
Posts: 99
Joined: Tue Mar 08, 2011 5:43 pm
Location: St. Louis, MO

Re: Co2 Laser High Voltage plug and wire

Postby pinoynyc » Tue Apr 15, 2014 4:11 pm

Chankkster, thanks, I already have the wire from lightobject.
pinoynyc
 
Posts: 10
Joined: Mon Mar 24, 2014 9:25 pm

Re: Co2 Laser High Voltage plug and wire

Postby wmgeorge » Tue Apr 15, 2014 11:48 pm

Any old line auto parts store as NAPA should have HV wire, tell them you want copper wire not carbon and should have spark plug connectors either 90 deg or straight and boots. Weather that will work for you I'm not sure. Most people just wrap the copper wire around the terminal end on the tube a few times and then over wrap with some solid core copper wire, kind of like what you did in Scouts when you whipped the end of a rope. Solder will not really work that well on the tungsten wire coming out of the tube.
Retired guy, Central Iowa US. Master Electrician Hobby Machine and Metal Fab Shop.
wmgeorge
 
Posts: 44
Joined: Wed Feb 26, 2014 2:41 pm


Return to Sources for stuff

Who is online

Users browsing this forum: No registered users and 7 guests