New SeeMeCNC Extruder

General discussion of 3D printers

New SeeMeCNC Extruder

Postby bdring » Thu May 09, 2013 12:52 pm

This looks like an interesting extruder that can be setup many ways, with multiple hot end options and even a bowden.

seemeextrude.png


http://shop.seemecnc.com/EZStruder-Extr ... -707XX.htm
seeme2.png
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: New SeeMeCNC Extruder

Postby bdring » Fri May 10, 2013 1:49 pm

I bought (2) yesterday and got a shipping notice. I have a MakerGear nozzle and a J Head that should snap right in. They are both 1.75mm. I can't see direct drive working to well with 3mm though. I am going to play with a couple options for mounting it to an ORD Bot.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: New SeeMeCNC Extruder

Postby Enraged » Fri May 10, 2013 3:21 pm

Please keep us informed, if it turns out to work well I think I'll end up getting one for my deltabot build.
Enraged
 
Posts: 439
Joined: Fri May 06, 2011 3:13 pm

Me too

Postby flickerfly » Fri May 10, 2013 4:00 pm

I also bought one and have received the shipping notice. Here's the SeeMeCNC forum post on it. http://forum.seemecnc.com/viewtopic.php?f=35&t=1840

Here's the video of it they put out. I saw Bart request STEP files from them, but they may not be available until after Maker Faire as they're headed that way now.

flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA

Re: New SeeMeCNC Extruder

Postby bdring » Fri May 10, 2013 4:05 pm

I did not formally request STEP files. I mentioned that on Twitter, but not directly. I did not want to bother them on a busy week.

I know John Oly and we trade email on various topics every so often. A STEP is probably not required to move forward anyways
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: New SeeMeCNC Extruder

Postby flickerfly » Fri May 10, 2013 5:42 pm

Sorry, didn't mean to put words in your mouth or suggest something. Thanks for clarifying.
flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA

Re: New SeeMeCNC Extruder

Postby flickerfly » Fri May 10, 2013 7:37 pm

Oh, just tracked this down while waiting for a meeting. It appears to include a zip with STLs and lots of other fun stuff.

http://www.reprap.org/wiki/EZStruder
flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA

Re: New SeeMeCNC Extruder

Postby bdring » Fri May 10, 2013 8:10 pm

The SAT file loaded fine. It going to be easy to mount it to the ORD Bots and Deltas.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: New SeeMeCNC Extruder

Postby richmond » Fri May 10, 2013 9:01 pm

What do people here think of the torque available with this? I've seen some references to being under powered for 3mm but as a 1.75 direct drive method maybe fine?
I ask as I've been going nuts trying to decide on extruder/hot end options for my Hadron and was about to ask someone to print me off a modified (to match ord x carriage holes) aluminatus extruder body and go with the planetary gear nema 11 Trinity has. But now I'm leaning to this extruder.... could I mount it to the geared nema11?

Gah, death by too many options! ;)
richmond
 
Posts: 15
Joined: Wed Jun 29, 2011 6:30 pm

Re: New SeeMeCNC Extruder

Postby DonaldJ » Fri May 10, 2013 9:14 pm

Received shipping notice today, so I'll be trying it on my Printrbot with 3mm filament.
DonaldJ
 
Posts: 21
Joined: Thu Apr 11, 2013 4:31 am

Next

Return to 3D Printer General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 2 guests