SpacedCowboy wrote:Hi all. So I was trying to fill in some of the gaps, and I have a few questions for anyone who has already built one of these ...
- B17023 - the double-bearing idler wheel. This is presumably different from B30041 (Smooth idler pulley assembly), even though B30041 has a double-bearing idler wheel. Is that true ? Or could we just add another B30041 and forget about B17023...
SpacedCowboy wrote:
- B18001-001 - eccentric spacer. Does anyone have more details on this ? Size, how big the hole is, etc.
SpacedCowboy wrote:
- B18012-115 - it's listed as 'DIN Rail 115mm Lf.', but what does that mean ? Looking on Digikey there appear to be lots of size (http://www.digikey.com/product-search/en/hardware-fasteners-accessories/channel-din-rail/2097970?k=din%20rail) of DIN rail. Presumably 115mm is the length. What does "Lf" mean ?
SpacedCowboy wrote:
- B18028 - Shaft Coupler 5mm x 6.35mm. 6.35mm is a quarter of an inch, but I can't find anything on McMaster Carr that does metric->imperial... Any hints ?
SpacedCowboy wrote:
- B28009 - Microswitch, Roller Type. Anyone got any dimensions ? Is it normally-on or normally-off ?
SpacedCowboy wrote:
- B28012 - Power-entry module. Is this just the panel-mount plug socket for wiring up the power supply ? Do we have the panel-mount dimensions ?
SpacedCowboy wrote:
I'm sure there'll be more, but that's all for the time being. Hope y'all can help
Simon
Users browsing this forum: No registered users and 17 guests