"New kit" BOM with sources

Questions, Suggestions, Tips, Etc

Re: "New kit" BOM with sources

Postby bdring » Thu Mar 14, 2013 12:41 pm

The BOM here is intended to be the official BOM for the laser.

http://www.buildlog.net/cnc_laser/erp/bom.html

This BOM is only for the Mechanical platform for the laser. All the electronics, are not part of the BOM. The wheels on the carriage are still the original single bearing V wheels and should be replaced with the dual bearing wheels. I will try to fix that in the next few days.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: "New kit" BOM with sources

Postby jkittle99 » Thu Mar 14, 2013 8:31 pm

So I rolled with this, placed my boltdepot order, and my stuff arrived today. I noticed the the screws are philips pan head screws (mostly) instead of socket head cap screws... Hopefully that's a non issue, otherwise I've got a nice pile of stainless screws for my 'junk drawer' LOL :) I'm sure that many places it probably doesn't matter... Just a little feedback from my order :)

Good times... :)

Praxis wrote:I'd like to note that between http://www.boltdepot.com and http://www.fastenal.com, you can order pretty much all the bits you'd get from McMaster-Carr. In some cases, it makes the most sense to buy from McMaster, otherwise, Boltdepot is cheaper if both it and fastenal have the same part. You can get all the annoying nylon spacers from Fastenal. According to my spreadsheet, without shipping, this reduces the 'McMaster Car BOM' from about $280 to about $86.

I should note I zeroed out the 5mmx10mmx1mm shims; these seem to be for the v-wheel/idler bearings, but now that we're buying those as a kit they come with, don't they? Also, in some cases, such as the spacers, the exact dimensions weren't available, so I generally chose the closest fit. In any case the difference is in the .02-.04" range.

Grr. I wish there was an easy way to embed that list here. Here's it in CSV format:

edit: Just realized I used the old BOM and not the new one listed here, so it is probably possible to save another few dollars eliminating depricated parts.

Code: Select all
,,,,,,McMaster Carr Price,Alternate Source Price,Alternate Source,Alt Source #
B18009-0800,Threaded Rod 1/4-20 x 8.00,"Zinc-Plated Steel Fully Threaded Stud 1/4""-20 Thread, 8"" Length, packs of 10
 ",3,McMaster Carr,95475A572,$13.04,$3.24,www.fastenal.com,11126145
B18009-1000,Threaded Rod 1/4-20 x 10.00,"Zinc-Plated Steel Fully Threaded Stud 1/4""-20 Thread, 10"" Length, packs of 5
 ",1,McMaster Carr,95475A576,$8.26,$1.36,www.fastenal.com,11126149
B18026,Shim 5mm 10mm 1mm,"Metric Spring Steel Shim - DIN 988 1.0mm Thick, 5mm ID, 10mm OD, packs of 50
 ",10,McMaster Carr,98055A099,$8.26,$0.00,,
B18029-1200,"Shaft, 0.250 dia. 12.00 Long","Hardened Precision Steel Shaft 1/4"" Diameter, 12"" Length
 ",1,McMaster Carr,6061K31,$5.11,$5.11,,
B18029-1400,"Shaft, 0.250 dia. 14.00 Long","Hardened Precision Steel Shaft 1/4"" Diameter, 14"" Length
 ",1,McMaster Carr,6061K415,$6.04,$6.04,,
B28002,Grommet 1/2ID 3/4Panel Hole,"Push-in Grommet 1/2"" ID, 1"" OD, 3/32"" Thk for a 3/4"" Dia Panel Hole, packs of 50
 ",3,McMaster Carr,9600K22,$9.27,$9.27,,
B28022,Leveling Foot 10-24 Thread,"HI-Cap Leveling Mount w/ Zinc-Plated STL Stud 10-24 X 1-1/2"" L Thread, 1-3/16"" Base Dia
 ",4,McMaster Carr,62805K31,$7.92,$7.92,,
B28023,Duct Flange 4.00,"Steel Angle Ring with 6 Holes, 4"" Duct Diameter, 9/32"" Hole
 ",1,McMaster Carr,1764K42,$4.31,$4.31,,
FHMSM510S,Flat Head Machine Screw M5 x 10mm,"Metric Flat Head Phillips Machine Screw Zinc-Plated STL, M5 Size, 10mm Length, .8mm Pitch, packs of 100
 ",8,McMaster Carr,91420A320,$4.05,$1.04,boltdepot.com,5123
FLW04SS,Flat Washer #4 Std Size,"18-8 Stainless Steel Type A SAE Flat Washer NO. 4 Screw Size, 5/16"" OD, .02""-.04"" Thick, packs of 100
 ",18,McMaster Carr,96659A101,$2.96,$2.96,,
FLW10SS,Flat Washer #10 Std Size,"Black-Oxide Steel Type A SAE Flat Washer NO. 10 Screw Size, 1/2"" OD, .03""-.07"" Thick, packs of 100
 ",94,McMaster Carr,97416A115,$3.82,$3.82,,
HN0256NL,Hex Nut #2-56 Nylon Locking,"Znc-Pltd Grade 2 STL Nylon-Insert Hex Locknut 2-56 Thread Size, 1/4"" Width, 9/64"" Height, packs of 100
 ",10,McMaster Carr,90631A003,$3.45,$1.71,www.fastenal.com,37003
HN0440NL,Hex Nut #4-40 Nylon Locking,"Znc-Pltd Grade 2 STL Nylon-Insert Hex Locknut 4-40 Thread Size, 1/4"" Width, 9/64"" Height, packs of 100
 ",12,McMaster Carr,90631A005,$2.55,$0.60,boltdepot.com,9193
HN1032SS,Hex Nut #10-32 Std Size,"Type 316 SS Machine Screw Hex Nut 10-32 Thread Size, 3/8"" Width, 1/8"" Height, packs of 100
 ",6,McMaster Carr,90257A411,$9.22,$0.36,boltdepot.com,2561
HN2520NLT,Hex Nut #1/4-20 Nylon Locking Thin,"Grade 8 Steel Nylon-Insert Thin Hex Locknut Znc-Yellow Pltd, 1/4""-20 Thrd Sz, 7/16"" W, 13/64"" H, packs of 100
 ",4,McMaster Carr,94945A205,$6.70,$0.54,www.fastenal.com,37183
HNM5NL,Hex Nut M5 Nylon Locking,"Metric Zinc-Plated Steel Nylon-Insert Locknut Class 8, M5 Sz, .8mm Pitch, 8mm Width, 5mm Height, packs of 100
 ",20,McMaster Carr,90576A104 ,$4.18,$1.40,boltdepot.com,4794
PHMS025610S,Pan Head Machine Screw #2-56x5/8,"18-8 SS Pan Head Phillips Machine Screw 2-56 Thread, 5/8"" Length, packs of 100
 ",10,McMaster Carr,91772A082,$4.15,$0.60,boltdepot.com,7656
PHMS063206SEM,Pan Head Mach Screw #6-32 x 3/8 SEMS,"Zinc-Plated Steel Pan Head Phil Machine Screw External Washer, 6-32 Thread, 3/8"" Length, packs of 100
 ",3,McMaster Carr,90402A146,$6.95,$0.15,boltdepot.com,1335
PHMSM308S,Pan Head Machine Screw M3 x 8mm,"18-8 SS Metric Pan Head Phil Machine Screw M3 Size, 8mm Length, .5mm Pitch, packs of 100
 ",2,McMaster Carr,92000A118,$4.66,$0.10,boltdepot.com,6831
PHMSM310S,Pan Head Machine Screw M3 x 10mm,"18-8 SS Metric Pan Head Phil Machine Screw M3 Size, 10mm Length, .5mm Pitch, packs of 100
 ",10,McMaster Carr,92000A120,$4.34,$0.60,boltdepot.com,6832
SHMS103216N,Socket Head Machine Screw #10-32x1 Nylon,"Nylon Socket Head Cap Screw 10-32 Thread, 1"" Length, Black, packs of 100
 ",6,McMaster Carr,97334A992,$6.41,$0.56,www.fastenal.com,184117
SHMSM330S,Socket Head Machine Screw M3x30mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M3 Thread, 30mm Length, 0.50mm Pitch, packs of 100
 ",4,McMaster Carr,91290A130,$9.82,$0.44,boltdepot.com,6838
SHMSM510S,Socket Head Machine Screw M5x10mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 10mm Length, 0.80mm Pitch, packs of 100
 ",184,McMaster Carr,91290A224,$13.98,$16.22,boltdepot.com,5176
SHMSM512S,Socket Head Machine Screw M5x12mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 12mm Length, 0.80mm Pitch, packs of 100
 ",34,McMaster Carr,91290A228,$8.02,$4.08,boltdepot.com,5177
SHMSM514S,Socket Head Machine Screw M5x14mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 14mm Length, 0.80mm Pitch, packs of 100
 ",7,McMaster Carr,91290A230,$7.90,1.47,www.fastenal.com,39539
SHMSM525S,Socket Head Machine Screw M5x25mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 25mm Length, 0.80mm Pitch, packs of 100
 ",8,McMaster Carr,91290A252,$9.24,$1.20,boltdepot.com,5180
SHMSM530S,Socket Head Machine Screw M5x30mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 30mm Length, 0.80mm Pitch, packs of 100
 ",7,McMaster Carr,91290A254,$10.22,$1.26,boltdepot.com,5181
SHMSM535S,Socket Head Machine Screw M5x35mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 35mm Length, 0.80mm Pitch, packs of 100
 ",9,McMaster Carr,91290A256,$13.28,$1.89,boltdepot.com,5182
SHMSM545S,Socket Head Mach Screw M5 x 45mm,"Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 45mm Length, 0.80mm Pitch, packs of 50
 ",1,McMaster Carr,91290A260,$7.98,$0.31,boltdepot.com,5184
SLW04SS,Split Lock Washer #4,"18-8 Stainless Steel Split Lock Washer NO. 4 Screw Size, .21"" OD, .02"" min Thick, packs of 1000
 ",8,McMaster Carr,92146A005,$5.22,$0.42,www.fastenal.com,173186
SLW10SS,Split Lock Washer #10,"18-8 Stainless Steel Split Lock Washer NO. 10 Screw Size, .34"" OD, .04"" min Thick, packs of 1000
 ",10,McMaster Carr,92146A011,$12.84,$0.65,www.fastenal.com,173190
SN1032SS,Square Nut #10-32,"18-8 Stainless Steel Square Nut 10-32 Thread Size, 3/8"" Width, 1/8"" Height, packs of 100
 ",6,McMaster Carr,94785A411,$9.26,$1.19,www.fastenal.com,170850
SPACER_115_250_875,SPACER .115D .250DIA .875LG,"Nylon Unthreaded Spacer 1/4"" OD, 7/8"" Length, #4 Screw Size, packs of 100
 ",4,McMaster Carr,94639A208,$9.35,$0.38,www.fastenal.com,145666
SPACER_192_312_125,SPACER .192ID .312DIA .125LG,"Nylon Unthreaded Spacer 5/16"" OD, 1/8"" Length, #10 Screw Size, packs of 100
 ",2,McMaster Carr,94639A350,$7.04,$0.22,www.fastenal.com,145767
SPACER_192_312_250,SPACER .192ID .312DIA .250LG,"Nylon Unthreaded Spacer 5/16"" OD, 1/4"" Length, #10 Screw Size, packs of 100
 ",12,McMaster Carr,94639A352,$7.45,$1.43,www.fastenal.com,145769
SPACER_192_375_375,SPACER .192ID .375DIA .375LG,"Nylon Unthreaded Spacer 3/8"" OD, 3/8"" Length, #10 Screw Size, packs of 100
 ",2,McMaster Carr,94639A454,$8.05,$0.32,www.fastenal.com,145783
SPACER_192_375_875,SPACER .192ID .375DIA .875LG,"Nylon Unthreaded Spacer 3/8"" OD, 7/8"" Length, #10 Screw Size, packs of 100
 ",6,McMaster Carr,94639A450,$9.64,$1.07,www.fastenal.com,145789
THMS044008S,TRUSS HEAD SCREW #4-40 x 1/2,"18-8 SS Truss Head Phillips Machine Screw 4-40 Thread, 1/2"" Length, packs of 100
 ",14,McMaster Carr,91770A096,$4.70,$0.70,boltdepot.com,6904
THMS063204S,TRUSS HEAD SCREW #6-32 x 1/4,"18-8 SS Truss Head Phillips Machine Screw 6-32 Thread, 1/4"" Length, packs of 100
 ",10,McMaster Carr,91770A144,$4.35,$0.50,boltdepot.com,6908
,,,,,,$283.99,$85.44,,
jkittle99
 
Posts: 13
Joined: Tue Mar 12, 2013 6:19 pm

Re: "New kit" BOM with sources

Postby cvoinescu » Thu Mar 14, 2013 9:10 pm

If you got Philips pan heads instead of hex socket caps, Boltdepot screwed up your order. Check that you actually ordered the right thing, then contact them. Don't let it slide. The Philips screws are cheaper. More importantly, they are more difficult to tighten firmly, especially in confined spaces.
cvoinescu
 
Posts: 501
Joined: Thu Aug 09, 2012 9:12 am
Location: Camberley, Surrey, UK

Re: "New kit" BOM with sources

Postby jkittle99 » Thu Mar 14, 2013 11:01 pm

I'm pretty sure the error is mine, not theirs. I'll respond at length later when I get a chance to sit down and double-check my own work. The order was cheap enough I'm not out anything significant if it was my lack of attention.... good quality hardware, I'll find a use for it. I've gotta give them kudos for fantastic packaging and super fast shipping, either way!

<Revised>

Indeed I did find some errors in the bolt depot part numbers from the list above from Praxis (no big deal, it happens). The ones that I've found so far (I'll do an exhaustive compare later, but I think I've got the big hitters identified) are as shown

Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M3 Thread, 30mm Length, 0.50mm Pitch boltdepot # 6385
Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 10mm Length, 0.80mm Pitch boltdepot # 6407
Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 12mm Length, 0.80mm Pitch boltdepot # 6408
Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 25mm Length, 0.80mm Pitch boltdepot # 6411
Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 30mm Length, 0.80mm Pitch boltdepot # 6412
Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 35mm Length, 0.80mm Pitch boltdepot # 6413
Metric Class 12.9 Socket Head Cap Screw Alloy Steel, M5 Thread, 45mm Length, 0.80mm Pitch boltdepot # 6452

The part number shown are what I believe to be the equivalent boltdepot part numbers, be careful as the part numbers shown previously for these (a few posts back) are the correct length and material, but are in a pan head phillips configuration. I'll know when I compare the costs if there is actually money to be saved, knowing the correct part numbers now for comparison.

ON a side note, my order from misumi should arrive tomororw. I can't wait!
jkittle99
 
Posts: 13
Joined: Tue Mar 12, 2013 6:19 pm

Re: "New kit" BOM with sources

Postby jkittle99 » Sat Mar 16, 2013 1:27 am

I went ahead and rolled with the philips bolts, and put my frame together tonight. It wasnt worth the hassle to order another batch, Ill fill in holes as needed if necessary, but they worked out just fine.
jkittle99
 
Posts: 13
Joined: Tue Mar 12, 2013 6:19 pm

Previous

Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 4 guests

cron