Possible 2.x laser Kits Batch #7

Questions, Suggestions, Tips, Etc

Re: Possible 2.x laser Kits Batch #7

Postby bdring » Mon Apr 15, 2013 1:45 pm

I hope to produce some new kits very soon. I may be converting the some of the 1/4" bore bearings to flanged bearings. I have some due here shortly. They might make my fabrication easier and make a better design. I would supply them as part of the kit. it should have little impact on the cost because a bought a passel of them.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Possible 2.x laser Kits Batch #7

Postby ggreeve » Mon Apr 15, 2013 4:48 pm

Excellent, Im on standby
ggreeve
 
Posts: 3
Joined: Thu Apr 04, 2013 5:27 pm

Re: Possible 2.x laser Kits Batch #7

Postby owensbyjason » Wed Apr 17, 2013 12:02 am

Any future plans for skins?
owensbyjason
 
Posts: 11
Joined: Sun Dec 30, 2012 1:57 am

Re: Possible 2.x laser Kits Batch #7

Postby ag3c » Wed Apr 17, 2013 12:05 am

I'm definitely interested in some skins as well!
ag3c
 
Posts: 16
Joined: Thu Sep 09, 2010 11:51 pm

Re: Possible 2.x laser Kits Batch #7

Postby bdring » Sun Apr 28, 2013 12:41 am

I finally got the bearings. They were stuck in customs and DHL for almost 2 weeks. I did a little test batch and I think they will work fine. This will save me a lot of time.

flanged_bearings.JPG


I should be able to get some kits done in the next week.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

3 Kits in the store!

Postby bdring » Sun Apr 28, 2013 6:29 pm

There are (3) kits in the store. They come with the free Inventables.com sample kit and $25 gift certificate. They also have flange bearings pre-installed in the (7) Z bearing brackets.

http://store.makerslide.com/index.php?m ... ucts_id=70
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Possible 2.x laser Kits Batch #7

Postby ggreeve » Sun Apr 28, 2013 8:50 pm

Great, thanks for the heads up, I grabbed me one!!
ggreeve
 
Posts: 3
Joined: Thu Apr 04, 2013 5:27 pm

Re: Possible 2.x laser Kits Batch #7

Postby vtmactech » Sun Apr 28, 2013 10:03 pm

Thanks Bart, grabbed one also. I'm still interested in skins if you find time. Also, I just went backed and looked at this kit. I bought your "metal parts" kit at the end of last year so guessing I have duplicates of those pieces? As always thanks for the hard work :)
vtmactech
 
Posts: 3
Joined: Sun Jul 03, 2011 5:49 pm

Re: Possible 2.x laser Kits Batch #7

Postby Cap'n Ron » Mon Apr 29, 2013 5:46 pm

I've been looking for kits in all the wrong places here in the forum. I was looking early Sunday Morning and found nothing.
And today all kits are gone? Monday (worked Sunday 'till late). Can anyone suggest a REASONABLE machine shop in the Tampa Bay area (or anywhere else for that matter)? I have had absolutely no luck in finding someone to fabricate the metal parts.
Cap'n Ron
Cap'n Ron
 
Posts: 4
Joined: Sat Apr 27, 2013 10:24 pm

Re: Possible 2.x laser Kits Batch #7

Postby oldbot » Fri May 03, 2013 5:02 am

My first 2.x is complete except for the skins and cover.
I am trying to decide whether to fabricate the skins and cover myself or wait for them to become available.
Either way is fine, but if the skins will be available in the next month, I prefer to buy them.
oldbot
 
Posts: 12
Joined: Fri Mar 29, 2013 1:19 pm

PreviousNext

Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 11 guests

cron