Electronics Layout

Questions, Suggestions, Tips, Etc

Electronics Layout

Postby mlconti » Sun Dec 02, 2012 11:24 pm

Can anyone chime in and let me know if you see any reason this layout will not work... TIA

proposed layout.jpg
If you can think of it, I can Automate it!
mlconti
 
Posts: 24
Joined: Mon Apr 25, 2011 1:04 am
Location: Alvin, Texas

Re: Electronics Layout

Postby bdring » Mon Dec 03, 2012 3:09 am

That looks OK. I have tried dozens of control schemes over the years. With one setup using Mach3 I was getting occasional false steps when the laser was fired. I put the laser power supply on a metal shelf above the rest of the electronics.

Here is a really old picture I took when testing the Mach3 version. I use DSP now, but I left the shelf in place. I have an extrusion along the right edge of the shelf now.

metal_shelf.JPG
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA


Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 9 guests

cron