Z Idler Bracket

Questions, Suggestions, Tips, Etc

Z Idler Bracket

Postby bdring » Fri Mar 25, 2011 11:03 pm

Thee Z Idler/tensioner bracket's bearing hole appears to be too small on the last batch. I don't know why because the dimensions are correct in the 3D model and the CAM file. It is possible the wrong tool was used. I noticed it looked funny when putting together a kit.

I can send out replacements. On my first build of my unit I simply tensioned the belt by moving one of the lead screws out. That might be a temporary fix while you wait for the replacement.

Let me know if you need a replacement. Before you ask check the current BOM vs your kits because hardware is always being updated and here is your chance to get a shipping cost free hardware upgrade.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 5 guests

cron