M5 x 12mm or M5 x 10mm?
Posted: Fri Nov 11, 2011 7:55 pm
I'm working to assemble the frame of the laser.
D30027 seems to indicate that a M5 x 12mm socket head cap screw is used for everything on the frame...
But the BOM shows that you don't buy enough M5 x 12mm screws to cover assembly, and it appears that M5 x 10mm is the way to go according to BOM.
Which one is it? Is it just a typo on the frame assembly drawing? I assume the M5 x 10mm bolts will work, as 2mm isn't going to be a big difference.. I just wanted to clarify about this potential error before I put the whole frame together.
D30027 seems to indicate that a M5 x 12mm socket head cap screw is used for everything on the frame...
But the BOM shows that you don't buy enough M5 x 12mm screws to cover assembly, and it appears that M5 x 10mm is the way to go according to BOM.
Which one is it? Is it just a typo on the frame assembly drawing? I assume the M5 x 10mm bolts will work, as 2mm isn't going to be a big difference.. I just wanted to clarify about this potential error before I put the whole frame together.