by a542002 » Mon Feb 06, 2012 10:23 am
Hi,
I did figure out with marcos help what was the probleme: after inserting the USB stick formated in FAT32 I need to press the reset botton afterwards the the machine will recognize the stick.
the probleme what I have now is that the machine will only accept files in the machine file format what is " .UD5" it will not recocgnize the files saved from the lasercut software because they are in format " . pwj5" and it is pretty much impossible to safe from LC to ".UD5" format.
this means I have to load the file first in the machine and then download it back to the USB stickl what is realy bad and means the computer has to be connected first and I can not make the file on another machine - download it to the USB stick and then load it in the machine.
lots of little things which only come out during real work need to be worked out with lasercut software and the AW608
greetings
walt