Is DSP All In One Solution?
Posted:
Fri Mar 30, 2012 4:46 amby wildseyed
My 100 Watt tube arrive earlier in the week. In the sort term, I need to do a quick firing of the laser, just in case it's not working.
I have not purchased electronics yet, and was wondering if the DSP 2012 is an all in one solution for the motion (drives steppers), and laser control (pwm or voltage), or do I need "other" components, in addition to the DSP kit.
Thanks!
Re: Is DSP All In One Solution?
Posted:
Fri Mar 30, 2012 9:40 amby a542002
Hi there,
no you need a PWM laser powersupply in the wattage of your laser tube, 2 or 3 motor driver, a 24V main powersupply in order to get it work.
if you need more info draw me a line on my PM "
a542002@hotmail.comgreetings
walt
Re: Is DSP All In One Solution?
Posted:
Tue Apr 03, 2012 1:32 pmby wildseyed
I guess "Not Purchased any electronics is in accurate". I do have my power supplies.
What I need now is three stepper drivers AND DSP controlling electronics.
Thanks Walt.
Re: Is DSP All In One Solution?
Posted:
Tue Apr 03, 2012 6:46 pmby twehr
wildseyed wrote:I guess "Not Purchased any electronics is in accurate". I do have my power supplies.
What I need now is three stepper drivers AND DSP controlling electronics.
Thanks Walt.
Bart's 4 axis is a good choice. Also, from LO, you can get individual steppers. I have used the DSP with both setups and it works well both ways.