Update 40W to DSP control from MoshiDRAW software

Discussions and help on this commercial controller.

Moderator: twehr

Update 40W to DSP control from MoshiDRAW software

Postby automationtech » Wed Jul 03, 2013 9:19 pm

This machine is updated with DSP Control System for CorelDraw/AutoCAD and other advance software. This machine is compatible with WIN7, Vista, XP and WIN2000.

It supports multiple graphic formats, such as PLT / DXF / BMP / JPG / GIF / PGN / TIF and so on.

Following items are included:
1: Machine Engraver with 40W CO2 tube
2: DSP Driver, 1pcs RDLC320-A Main panel, 1pcs RDLC320-A Controller , LaserWork software.
3: Water pump 5: Fan and tube

Engraving Area: 12x8in (300x200mm)
Maximum Item Size to Engrave: 10.25W x 8.75L x 2.85H in (260mm x 220mm x 70mm)
- See more at: http://www.automationtechnologiesinc.co ... qwvs5.dpuf
http://www.automationtechnologiesinc.co ... k-software
Attachments
Laser machine.jpg
automationtech
 
Posts: 46
Joined: Wed Jul 18, 2012 10:20 pm

Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 8 guests

cron