Handheld LCD control unit for AWC608 DSP

Discussions and help on this commercial controller.

Moderator: twehr

Handheld LCD control unit for AWC608 DSP

Postby Speedythinker » Fri Sep 06, 2013 8:14 pm

Hello folks:

I'd to introduce a new toy that I made. It is a handheld LCD control unit to replace the panel mounted type for the Lightobject AWC608 DSP controller.
See a short demo on youtube: http://www.youtube.com/watch?feature=pl ... doXxYy0Tbc

10 unit should be available in about a month and I'm taking $100 for early bird purchase. After that, I'll sell it around $135~$145 on my website


Regards,
Marco
Lightobject.com
Attachments
Handheld2.jpg
Handheld1.jpg
Last edited by Speedythinker on Mon Sep 09, 2013 9:24 pm, edited 1 time in total.
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Handheld LCD control unit for AWC608 DSP

Postby pourcirm » Mon Sep 09, 2013 5:51 pm

What kind of cost would I be looking at if I wanted to get this unit and just the AWC608? I have Bart's Laser Interface Board already so I only need those two additional pieces to max out my control capabilities.

Thanks.
pourcirm
 
Posts: 25
Joined: Fri Jun 07, 2013 5:03 pm

Re: Handheld LCD control unit for AWC608 DSP

Postby Speedythinker » Mon Sep 09, 2013 9:27 pm

http://www.lightobject.com/AWC608-Comme ... -P321.aspx
Add $45 to upgrade the panel mounted LCD to the handheld type. Note that you will get only one LCD unit but not both with the extra amount you paid.

The handheld unit is still under production and it need about a month to receive it


Marco
Lightobject.com
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Handheld LCD control unit for AWC608 DSP

Postby pourcirm » Mon Sep 09, 2013 10:04 pm

Do you sell a version without the green control board? I don't really think I need that since I already have the BuildLog.net control board to connect to.
pourcirm
 
Posts: 25
Joined: Fri Jun 07, 2013 5:03 pm

Re: Handheld LCD control unit for AWC608 DSP

Postby Speedythinker » Tue Sep 10, 2013 4:11 am

If you don't need the green board (the main board), then for sure you don't need the AWC608 DSP from us. You must have your own.
The LCD works only on the AWC608 board, nothing else

Marco
Lightobject.com
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Handheld LCD control unit for AWC608 DSP

Postby pourcirm » Wed Feb 26, 2014 3:45 am

Is this handheld controller deal still available? I've done more research and cleared up the stupid questions I was asking previously and I'm ready to move forward with the DSP to finish my build.

Thanks,
Ryan
pourcirm
 
Posts: 25
Joined: Fri Jun 07, 2013 5:03 pm

Re: Handheld LCD control unit for AWC608 DSP

Postby Speedythinker » Thu Feb 27, 2014 8:14 am

Hello Ryan:

All handheld LCD unit sold out. The next batch of 50 units should come in about a month. Currently it is under production

Marco
Lightobject.com
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Handheld LCD control unit for AWC608 DSP

Postby asb79 » Thu Feb 27, 2014 11:14 am

Hi Marco,

Does the hand controller add any extra functionality or features over the Panel mounted LCD?

Cheers
Anthony
asb79
 
Posts: 8
Joined: Wed Apr 06, 2011 12:00 pm

Re: Handheld LCD control unit for AWC608 DSP

Postby Speedythinker » Thu Feb 27, 2014 7:16 pm

It added no extra features in additional to the panel mounted LCD unit.

FYI, I'll launch a 7" full touch screen LCD unit for a new model DSP in about 2~3 months. Stay tuned


Marco
Lightobject.com
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Handheld LCD control unit for AWC608 DSP

Postby pourcirm » Fri Aug 08, 2014 2:23 am

Hey Marco,

Just curious if you had any more info to share about the LCD you mentioned here a few months ago. I'm working on the electronics of my build and I'm ready to knock out the controller. I'm probably going to be buying some mounts from you soon so I was hoping to place a single order for what I need. Worst case I'll probably buy your handheld unit, but if the LCD is something cool I may consider it instead.

Thanks,
Ryan
pourcirm
 
Posts: 25
Joined: Fri Jun 07, 2013 5:03 pm

Next

Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: Majestic-12 [Bot] and 2 guests

cron