AWC708Lite

Discussions and help on this commercial controller.

Moderator: twehr

AWC708Lite

Postby jamese » Mon Nov 02, 2015 1:11 pm

Hello

Does anyone have any tips for setting up the 708Lite from Sinjoe?
I am making progress but having issues with setting up my 'home' position. Which I feel is best as 'back-left'.
As this gives room to load material etc. As opposed to the zero co ordinates which i feel should be front left
as that helps in drawing designs with the origin point being x=0 y=0.
The sinjoe manual is not exactly helpful in this initial setup.

Thanks all

James
jamese
 
Posts: 11
Joined: Mon Jul 23, 2012 7:35 pm

Re: AWC708Lite

Postby Techgraphix » Mon Nov 02, 2015 10:34 pm

My homepoint is up-right but it doesn't matter wher you want your homepoint to be.
In LaserCad you can set where you want to home.. Options>System-Options>Work Space>Machine Zero... Set this to the position you like.
Techgraphix
 
Posts: 122
Joined: Fri Feb 24, 2012 8:37 pm
Location: Appelscha, NL


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 2 guests