DSP Commercial Controller Support
Posted: Thu Jul 14, 2011 6:52 pm
Since the release of the Laser 2.x, there has been an increasing interest by builders in using the DSP commercial controllers from LightObject and other places. I have been using one of these controllers since before the 2.x and continue to use it on my own 2.x. Several other users have also successfully installed it in their builds using some documentation that I supplied. I suspect that other builders will be following suit. So Bart has added this forum area to allow us to all provide mutual support for the controller. We encourage everyone to use this forum section as your primary posting spot for your questions or ideas on this subject.
Additionally, over the next couple of months, I will be creating some posts to help you get started, to solve problems, and to use many of the features that you may not be aware of or may be aware but not sure what to do with it. Most will provide photos, videos, and documentation focused on a single aspect of the controller, especially as it relates to BuildLog.net lasers and users. Your questions will help determine the order these articles are done. Until then, I will pick the items that I have the most experience with or that interest me the most.
Additionally, over the next couple of months, I will be creating some posts to help you get started, to solve problems, and to use many of the features that you may not be aware of or may be aware but not sure what to do with it. Most will provide photos, videos, and documentation focused on a single aspect of the controller, especially as it relates to BuildLog.net lasers and users. Your questions will help determine the order these articles are done. Until then, I will pick the items that I have the most experience with or that interest me the most.