Laser output setting in DSP

Discussions and help on this commercial controller.

Moderator: twehr

Laser output setting in DSP

Postby dwessels » Sat Sep 24, 2011 6:28 am

In the light object DSP, when you set the max laser power output setting to a level (let's say 60%) will that be the max that you can use for engraving / cutting?

In other words, if you set the max to 60%, does 60% become the new 100%, or is 60% the max you can use in a job?

Hope the question makes sense.

Thanks
dwessels
 
Posts: 35
Joined: Sat Aug 27, 2011 5:26 pm

Re: Laser output setting in DSP

Postby J45on » Sat Sep 24, 2011 8:49 am

Tim "twehr" explains this nicely in his blog ( better than I could :D )

http://diylaser.midwestlaserarts.com/20 ... -fool.html
J45on
 
Posts: 258
Joined: Thu Mar 31, 2011 11:30 am
Location: Kent,united kingdom


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 3 guests

cron