Longer Z axis

Topics Related to the ORD Bot Printer

Longer Z axis

Postby bjoerngiesler » Mon Aug 22, 2016 8:27 pm

Hi all,

haven't visited here a while, mostly due to the fact that my Hadron just works :-)

But now I have a print that I have a problem with. It's just slightly too tall. It's the Easy Printing Electric Violin, http://www.thingiverse.com/thing:767536, by firecardenal. It is almost exactly 20cm tall, and my Hadron is able to do 19cm max, even with longer couplers and all. I could make do with hacks, like putting a thick shim underneath the extruder holder, but I'd much rather do things properly. So it looks like a longer Z axis is in order.

Unfortunately, most of the webshops don't carry the Hadron anymore, and certainly not any upgrades. Can you guys give me a hint where to get longer lead screws? They are not regular M8s, are they? So simple threaded rod from the hardware store is problematic, right?

Regards
Björn
bjoerngiesler
 
Posts: 33
Joined: Tue Feb 14, 2012 3:28 pm

Re: Longer Z axis

Postby geoffs » Tue Sep 20, 2016 11:28 pm

I installed a pair of these ACME threaded rods
http://www.banggood.com/3D-Printer-300m ... 80650.html
They give me 195mm in Z height but I have the Z axis anti-wobble devices fitted which remove about 25mm of travel.
This is with a J-Head hotend that extends below the X carriage by 15mm
geoffs
 
Posts: 78
Joined: Fri May 06, 2011 12:01 am
Location: Tasmania, Australia


Return to ORD Bot

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron