PS1 DIY CNC Night

Topics Related to the ORD Bot Printer

PS1 DIY CNC Night

Postby bdring » Fri Mar 09, 2012 5:46 pm

There will be ORD Bots at the Chicago HackerSpace Pumping Station One (PS1) on Wednesday the 14th. It is open to the public, so stop by if you are in the area. There could be as many as three including the elusive serial #1 Hadron.

We might even see one printing at 500mm/sec if Jeremy meets his goal :P.

Buildlog.net and ShapeOko are donating a ShapeOko router to PS1 so you can see one of those as well.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: PS1 DIY CNC Night

Postby bdring » Thu Mar 15, 2012 6:40 pm

Here is a photo from last night. There were three ORD Bots, but you can only see one in the picture. Half way down the right side you can see Jeremy's Quantum. He has a fan on the back to cool the hot MK7 extruder stepper driver. The other two were my Quantum and Hadron, but they are hiding behind the Cupcake printers. Jeremy was printing non stop all night. He was also in high demand getting other printers to work. I could have sold about 4-5 ORDs right out of my trunk.

Zach from Inventables (and inventor of ORD Camp) was there, but out of frame. I got his official blessing to keep using the name ORD :D

There was a ShapeOko being built along the left side of the table, but hard to see.

It was also Pi day (3/14) so a lot of pies showed up too.

It was a lot of fun. If you live near a HackerSpace and have not checked it out you are a fool.

DSC00120.JPG
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: PS1 DIY CNC Night

Postby orcinus » Thu Mar 15, 2012 9:22 pm

Piiiiiieeees...

Image
orcinus
 
Posts: 720
Joined: Tue Feb 14, 2012 4:03 am

Re: PS1 DIY CNC Night

Postby AndrewR » Fri Mar 16, 2012 12:56 am

I prefer Taaauuus. ;)

http://tauday.com/

Nice to see all the attention on the ORDs!
AndrewR
 
Posts: 22
Joined: Sun Feb 12, 2012 9:23 am
Location: Seattle, WA

Re: PS1 DIY CNC Night

Postby orcinus » Fri Mar 16, 2012 3:45 am

Taus are time constants ;)
orcinus
 
Posts: 720
Joined: Tue Feb 14, 2012 4:03 am


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 34 guests

cron