LED Strip Mount

Topics Related to the ORD Bot Printer

LED Strip Mount

Postby flurin » Fri Jun 21, 2013 3:25 pm

I've updated the LED Strip mount for the Hadron:

LSM3.JPG

http://www.thingiverse.com/thing:106844
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

Re: LED Strip Mount

Postby tmccafferty » Mon Jun 24, 2013 1:14 am

Nice!

What are the specifics and source for the LED?
tmccafferty
 
Posts: 131
Joined: Mon Jan 07, 2013 3:40 pm

Re: LED Strip Mount

Postby flickerfly » Mon Jun 24, 2013 1:19 am

I'm also interested in what leds you're using.

Flurin's a fun one to watch on Thingiverse.
flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA

Re: LED Strip Mount

Postby flurin » Mon Jun 24, 2013 8:35 am

I purchased this LED Strip in my country:

FLEXIBLE LED STRIP - COLD WHITE - 300 LEDs - 16.40 Ft - 12V

Width: 10.15 mm
The LED Strip is connected to the 12VDC Power Supply.

Link USA:
http://www.vellemanusa.com/products/view/?id=526514

Other Suppliers for similar LED Strips:

http://www.superbrightleds.com/moreinfo ... ls-x3/936/
or
http://www.adafruit.com/products/357
Last edited by flurin on Mon Jun 24, 2013 12:04 pm, edited 1 time in total.
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

thanks

Postby flickerfly » Mon Jun 24, 2013 11:59 am

Oh, I wouldn't have guessed this was the flexible strips. Thanks Flurin.
flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA

Re: LED Strip Mount

Postby regressedEE » Mon Jun 24, 2013 12:19 pm

Very classy! My ghetto version is just to slide the strip directly into the bottom slot of the MakerSlide. It fits pretty nicely and stays out of the way, but doesn't have the adjustable angle feature.
Attachments
2013-06-24 08.12.50.jpg
regressedEE
 
Posts: 25
Joined: Sat Oct 13, 2012 2:33 pm

Re: LED Strip Mount

Postby flurin » Mon Jun 24, 2013 12:48 pm

regressedEE wrote:My ghetto version is just to slide the strip directly into the bottom slot of the MakerSlide.

First I had a similar solution but I didn't like the shadow of the Extruder Carriage. This way the LED Strip is 30mm lower.

LSM5.JPG
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

Re: LED Strip Mount

Postby va3mw » Sun Jul 14, 2013 3:00 am

NGhobbies in Canada has LED strips as well and he ships all over the world.

http://www.nghobbies.com/cart/index.php ... cts_id=416

Pretty cheap. $4.45 for a 10cm strip.

mike
va3mw
 
Posts: 4
Joined: Sun Jul 14, 2013 2:56 am


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 2 guests

cron