Where to buy Hardon Z block

Topics Related to the ORD Bot Printer

Where to buy Hardon Z block

Postby syldcru » Sat Jul 06, 2013 1:27 pm

Where can I purchase the Hardon Z block, MXL Belt 1/4 Wide 388 Tooth, MXL Belt 1/4 Wide 475 Tooth, Belt Clamp and the threaded Rod M8 x 1.25 x 245mm. These are the last items needed before I can start my build and I cannot wait to start since its my birthday gift to myself.
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Where to buy Hardon Z block

Postby REdington » Sat Jul 06, 2013 2:34 pm

REdington
 
Posts: 57
Joined: Wed Aug 29, 2012 4:14 am
Location: Leavenworth Ks

Re: Where to buy Hardon Z block

Postby syldcru » Sun Jul 07, 2013 12:42 am

I am confused about the belts, The BOM said one belt is MXL Belt 1/4 Wide 388 Tooth and the other is MXL Belt 1/4 Wide 475 Tooth. Is that the tooth size or the number of tooth on the belt for the size that is needed?
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Where to buy Hardon Z block

Postby REdington » Sun Jul 07, 2013 1:49 am

Here is a printed belt clamp. Buying endless belt is a cheaper than buying the call for belts.
You'll need just under 6 feet of belt to do both axis on the Hadron.
McMaster Carr also has MXL endless belting also.

Image

Image

Hope this helps
Rodney

Here is the stl file for the printed clamp like that in the photo.
Attachments
belt clamp.stl
(207.3 KiB) Downloaded 805 times
REdington
 
Posts: 57
Joined: Wed Aug 29, 2012 4:14 am
Location: Leavenworth Ks

Re: Where to buy Hardon Z block

Postby syldcru » Thu Jul 11, 2013 1:56 am

Tank you for all the information!! I decided to go with the Budaschnozzle 2.0 w/ 0.35mm nozzle and the EZStruder Cold End Kit. I think they will work together :shock:
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Where to buy Hardon Z block

Postby flickerfly » Thu Jul 11, 2013 3:50 pm

syldcru wrote:I am confused about the belts, The BOM said one belt is MXL Belt 1/4 Wide 388 Tooth and the other is MXL Belt 1/4 Wide 475 Tooth. Is that the tooth size or the number of tooth on the belt for the size that is needed?


I didn't see this answered, sorry if it's a duplicate. That is the number of teeth. Both belts are identical except for the number of teeth and consequently the length.
flickerfly
 
Posts: 247
Joined: Sat Apr 27, 2013 10:04 pm
Location: Allentown, PA


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 7 guests

cron