Alrighty, Shopping List 2.0
Extruder:
Greg's Wade Reloaded -
http://www.makergeeks.com/waexrefukitr.html (No hot end but assembled including stepper motor, he was very helpful, RECOMMENDED)
J-Head 0.35mm orifice for 1.75mm filament + thermistor -
https://www.hotends.com/index.php?route ... duct_id=88 Heat cartridge 6mm dia. 24v -
http://item.mobileweb.ebay.ca/viewitem? ... 0560764011Heatbed:
MK2B 24v and thermistor -
http://www.reprapdiscount.com/electroni ... d-bed.html Tempered Glass 3mm thickness -
http://trinitylabs.com/products/borosil ... -for-prusa (just an example for the sake of a visual, I'll probably get something local).
Kapton Tape for glass -
http://item.mobileweb.ebay.ca/viewitem? ... 0864710486 (I hear this is good for protecting glass from damage and helping the piece to stick better).
ORD Bot Hadron Assembled Mschanical Platform:
http://item.mobileweb.ebay.com/viewitem ... 0981613057Controller + 4x DRV8825 Stepper Drivers + Heat Sinks:
http://www.panucatt.com/Azteeg_X3_repra ... ax33dp.htmLimit Switches:
http://ca.mouser.com/Search/m_ProductDe ... 50F15CD1-ZPower Supply:
http://item.mobileweb.ebay.com/viewitem ... cmd=VIDESC (I decided to go safe on the Power Supply, I'd rather have way more then enough then just enough, I've seen
many a PSU fry components in my time working at a computer store, lol)
So how's that look to you guys? Theory all sound?
QUESTION: what factors make high-end 3D Pronters better then the ord bot? That's why I've been inquiring about things like 0.9 degree stepper motors, thinner otifice hot end, and thinner filaments. Just trying to learn the theories to see if I could possibly implement some of my own designs.