Well I guess I need help with the set-up for this extruder. Can anybody help with the Config-H settings for this and any other setting I should adjust? Here is all the info I can gather:
Step angle = 1.8deg
Positional accuracy = +/-5%
Number of phases = 2
Temperature rise = 80C MAX
Rotor inertia = 18gcm2
Holding TQ = 1.2 Kg.cm
Rated current/Phase Amps DC = 0.67
Phase Resistance ohms = 9.2
Rated Voltage/Phase VDC = 6.2
Phase Inductance mH = 7.2
Gear Ratio = 19.2
Efficiency = 72%
Max permissible TQ (Nm) = 3.0
Moment Permissible TQ (Nm) = 5.0
Filament = ABS 1.75mm
Extruder head = All metal J-Head
Feed Gear OD = 12.25mm
This is the extruder I have:
http://www.ebay.com/itm/ALL-METAL-STATE ... 27d83d7b7aCan somebody share a working firmware file with me to see if there is something buried in mine that is causing issues?
Thanks!