Firmware: I lost my source file(s)

Topics Related to the ORD Bot Printer

Firmware: I lost my source file(s)

Postby nixtacy » Fri Jan 17, 2014 3:55 pm

I accidentally reformatted the laptop computer that I used to program my Azteeg X3 controller. I lost the Arduino files and all that mess, but that is all easily replaceable. What I did lose, that I don't want to rebuild from scratch, is the Firmware source code.

Is there anyway to download the uncompiled source code back off the Azteeg/Arduino?
nixtacy
 
Posts: 50
Joined: Fri Oct 26, 2012 2:34 am

Re: Firmware: I lost my source file(s)

Postby fma » Fri Jan 17, 2014 4:38 pm

Which firmware? They are all available on their respective sites...
Frédéric
fma
 
Posts: 213
Joined: Mon Aug 20, 2012 7:53 am

Re: Firmware: I lost my source file(s)

Postby cozmicray » Fri Jan 17, 2014 5:21 pm

Probably a good time to load the latest firmware
Marlin is at
https://github.com/ErikZalm/Marlin
you will have to go thru the configuration files and set up specific parameters


Repetier-host firmware at:
https://github.com/repetier/Repetier-Firmware

:D
cozmicray
 
Posts: 168
Joined: Thu Sep 20, 2012 4:32 pm
Location: Blue Bell, PA

Re: Firmware: I lost my source file(s)

Postby fma » Fri Jan 17, 2014 5:55 pm

+1 for Repetier! Look at:

http://www.repetier.com/firmware/v091

for a great on-line config tool...
Frédéric
fma
 
Posts: 213
Joined: Mon Aug 20, 2012 7:53 am


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 27 guests

cron