Firmware: I lost my source file(s)
Posted:
Fri Jan 17, 2014 3:55 pmby nixtacy
I accidentally reformatted the laptop computer that I used to program my Azteeg X3 controller. I lost the Arduino files and all that mess, but that is all easily replaceable. What I did lose, that I don't want to rebuild from scratch, is the Firmware source code.
Is there anyway to download the uncompiled source code back off the Azteeg/Arduino?
Re: Firmware: I lost my source file(s)
Posted:
Fri Jan 17, 2014 4:38 pmby fma
Which firmware? They are all available on their respective sites...
Re: Firmware: I lost my source file(s)
Posted:
Fri Jan 17, 2014 5:21 pmby cozmicray
Probably a good time to load the latest firmware
Marlin is at
https://github.com/ErikZalm/Marlinyou will have to go thru the configuration files and set up specific parameters
Repetier-host firmware at:
https://github.com/repetier/Repetier-Firmware 
Re: Firmware: I lost my source file(s)
Posted:
Fri Jan 17, 2014 5:55 pmby fma
+1 for Repetier! Look at:
http://www.repetier.com/firmware/v091for a great on-line config tool...