Page 1 of 1

Acrylic Cleaner

PostPosted: Sun Jul 24, 2011 10:51 pm
by BenJackson
I found this plastic cleaner by Plaskolite at Ace Hardware:

17157.CLEANER_4.jpg
17157.CLEANER_4.jpg (9.3 KiB) Viewed 4477 times


Cheap and works well on acrylic. I later found that Plaskolite is a big acrylic supplier so that makes sense. It's also available on Amazon for a lot less than other cleaners that specifically claim to work on acrylic.

This took the smoky haze caused by cutting wood with insufficient fume extraction (during my earliest test runs) right off my lid window.

Re: Acrylic Cleaner

PostPosted: Thu Jul 28, 2011 5:23 pm
by twehr
I went to Ace Hardware to see if they had this in stock locally. They did not. However, they did have another product specifically designed for plexiglass and acrylic. It is named Plexi Clean and was less than $5. Took it home and tried it on the laser lid. Worked great at cleaning off the accumulation of smoke and tar.

PlexiClean.jpg
PlexiClean.jpg (7.65 KiB) Viewed 4400 times