Calculating steps/mm

General discussion of laser machines

Calculating steps/mm

Postby edmond22 » Sun Dec 11, 2011 6:20 pm

Hi Guys

I need some help calculating steps/mm
I am running 20 tooth MXL pulleys, 1/8 microstep and MXL belt(0.08' or 2.032mm pitch)
that works out to 1000 steps/inch which should equal 39.370079 steps/mm does that sound right.
edmond22
 
Posts: 127
Joined: Sat Oct 09, 2010 7:55 pm
Location: Sunny South Africa

Re: Calculating steps/mm

Postby canadianavenger » Mon Dec 12, 2011 4:06 am

sounds right, assuming you're using a 200 step/revolution stepper. [1.8 degrees] (based on your English numbers, I didn't verify your metric values)
canadianavenger
 
Posts: 153
Joined: Wed Nov 30, 2011 3:24 am

Re: Calculating steps/mm

Postby bdring » Mon Dec 12, 2011 4:14 am

Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron