Ball Screws for Laser Y axis


Re: Ball Screws for Laser Y axis

Postby bdring » Tue May 15, 2012 6:14 pm

In the release I have it did not work for me.

I am not saying this is your problem, it is worth trying.

There are a could of topics on this. Here is one.

"If you didn't build it, you will never own it."
Site Admin
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Ball Screws for Laser Y axis

Postby gavztheouch » Tue May 15, 2012 8:26 pm

Thanks for that, its seems that was causing my screwed engravings. Unfortunetly it has not helped my backlash style issues.

I have taken some photos for reference. All squares were engraved using the y swing option in the dsp. The letters in the 3rd picture were cut using the dsp controller, speeding up or slowing down the cutting process had no effect on the vector cutting but did effect the engrave here are the results.

Speed 1. power 20%. Y swing
Speed 2. Power 20%. Y swing
Vector cut letters
Pen mounted to the gantry speed 1, same as first image. Strangely the lines appear quite well lined up with little if any backlash.
Timothy hay for rabbits delivered over the UK
Posts: 144
Joined: Sun Dec 12, 2010 11:08 am
Location: (Stirling) UK


Return to Mechatronics

Who is online

Users browsing this forum: No registered users and 1 guest