Mini power bed for K40 small Chinese laser machine

Bearings/Motors/Belts/Gears/Etc.

Mini power bed for K40 small Chinese laser machine

Postby Speedythinker » Wed Aug 15, 2012 4:30 pm

Folks:

I just completed the prototype of a mini Z power bed for the small engraving machine. See my Youtube posted at http://www.lightobject.info/viewtopic.php?f=61&t=1232

In the beginning, I'll get 5~10 unit before full production and it should be available in about 2 weeks. Early bird is welcome! The unit comes as a kit. It should take 45~50min or less to assembly it. Note, there is no driver or controller included but available on my site. It come with a a 42 series stepping motor capable to left 5lb object. You may want to change the focus lens to 38.5mm to take the advantage of full extension.


Regards,
Marco
Attachments
K40-Power_table2.jpg
K40-Power_table.jpg
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Mini power bed for K40 small Chinese laser machine

Postby GiriPod » Wed Aug 15, 2012 8:29 pm

Do you think it would fit the 4th generation hobby laser from FSL?

The rail layout for the K40 looks different to the FSL laser.
GiriPod
 
Posts: 26
Joined: Wed Jun 06, 2012 9:02 pm

Re: Mini power bed for K40 small Chinese laser machine

Postby Speedythinker » Thu Aug 16, 2012 2:51 am

Sorry I don't know as I don't have FSL machine. As matter of fact, I'll launch my own desktop 40W laser machine with the AWC608 DSP controller and with the power bed for less price. It will be DIY. Time frame: about 3 month.

Currently, I'm working on a new design of the XY stages and laser head. The preformance will be promising. Plus, a bigger power bed will be launched about the same time. 400x600 and 900x1200 or order upon request.

Marco
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Mini power bed for K40 small Chinese laser machine

Postby TLHarrell » Thu Aug 16, 2012 4:19 pm

For those of us who would consider purchasing it, can you supply a full set of dimensions for the table and the area around the motor so we can determine if it will fit or not?
40w Full Spectrum Engineering 5th Gen Hobby 20"x12" w/ Rotary Engraver
South San Francisco Bay Area - Sales and Support Representative for Full Spectrum Engineering
408-47-LASER - Skype: whitelightlaser-thomas - Facebook: White Light Laser
TLHarrell
 
Posts: 419
Joined: Thu Jul 28, 2011 11:30 pm
Location: Morgan Hill, CA

Re: Mini power bed for K40 small Chinese laser machine

Postby Speedythinker » Thu Aug 16, 2012 6:21 pm

I don't know AutoCad yet, so a image created by Ai. Hope that help
Marco
Attachments
K40PowerTableDim.jpg
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Mini power bed for K40 small Chinese laser machine

Postby Speedythinker » Sat Aug 18, 2012 3:32 pm

Update: Anodoization process completed and some enhancements have been done.

Marco
Attachments
K10.jpg
K2.jpg
K1.jpg
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am


Return to Mechatronics

Who is online

Users browsing this forum: No registered users and 4 guests

cron