by whmeade10 » Wed Jun 27, 2012 2:49 am
Thanks for the comments guys. I would like to get the 400 Step stepper but it is a single shaft and would work for the X and Z axis but not the Y. I need a double shaft for the Y axis the way my design is going to be. Not sure it will be a good idea to have a 1.8 degree on one axis and .9 degree on the other.
I found a tube with (3) 6 foot ACME 1/2-10 threaded rods from my first CNC router project that I am going to use for the Z table lifting mechanism. Those should work out really well and make the table pretty stable.
Now to see if I can find some double shafted steppers that are 400 steps per rev.
Cheers,
Bill
FSE 45w Deluxe CO2 Laser 5th Gen w/X7 DSP | CorelDRAW X7