Lightobject DSP Parameters

Discussions and help on this commercial controller.

Moderator: twehr

Lightobject DSP Parameters

Postby jbailey » Mon Jan 07, 2013 7:28 pm

Does anyone have a list or know where to find the parameters for the LaserCAD v6.27 for the Lightobject DSP.

Work Space
Advance Functions
Work Parameters
Manufacture Parameters(allows an import of a .cf5 file)
User Parameters (allows an import of a .cf5 file)
jbailey
 
Posts: 1
Joined: Mon Jan 07, 2013 6:27 pm

Re: Lightobject DSP Parameters

Postby a542002 » Thu Jan 10, 2013 10:03 am

Hi there
send me a PM at a542002@hotmail.com
greetings
waltfl


jbailey wrote:Does anyone have a list or know where to find the parameters for the LaserCAD v6.27 for the Lightobject DSP.

Work Space
Advance Functions
Work Parameters
Manufacture Parameters(allows an import of a .cf5 file)
User Parameters (allows an import of a .cf5 file)
a542002
 
Posts: 62
Joined: Wed Oct 19, 2011 9:37 am

Re: Lightobject DSP Parameters

Postby Chankster » Wed Feb 20, 2013 2:38 am

Does anyone have this info that they can post?
"This is not my sig", it said. - I looked at it suspiciously; Who's sig was it, then?
Chankster
 
Posts: 99
Joined: Tue Mar 08, 2011 5:43 pm
Location: St. Louis, MO

Re: Lightobject DSP Parameters

Postby mattrsch » Wed Feb 20, 2013 1:45 pm

I will post my .cf5 files when I get home. USE AT YOUR OWN RISK!
mattrsch
 
Posts: 98
Joined: Wed Jul 21, 2010 5:09 pm

Re: Lightobject DSP Parameters

Postby Gadroc » Wed Feb 20, 2013 3:02 pm

You can find all my settings in my build log. I would highly recommend being very careful of just loading some one else's profile. You really need to make sure you understand what each of the parameters does and then use other folks settings as guidelines.
Gadroc
 
Posts: 77
Joined: Thu Nov 10, 2011 8:18 pm


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 10 guests

cron