by bdring » Tue Mar 12, 2013 4:13 pm
There is more than 850mm of width in that area. You need the tube to clear the right side wall so you will probably slide it more to the left. When you do that, the wide part of the tube may hit the Z lift motor pulley. You might be able to move the z lift assembly to the left the same amount. My guess is with some minor tweaking you could get it to fit.
I am guessing because I do not have a good 3D model of the tube or even a decent drawing.
Bart
"If you didn't build it, you will never own it."