ZnSe focus lens

Issues related to safety

ZnSe focus lens

Postby Robert Williams » Wed Apr 27, 2011 3:51 pm

ZnSe is toxic. Is cotton knit gloves good protection for handling the lens?

Robert
Robert Williams
 
Posts: 24
Joined: Mon Nov 23, 2009 2:16 am
Location: Moreno Valley, CA

Re: ZnSe focus lens

Postby lasersafe1 » Thu Apr 28, 2011 1:45 pm

It is only toxic in California. You guys better use robots to handle it. The rest of us are fine with dry hands or finger cots. ZnSe will only break down when exposed to acids.
lasersafe1
 
Posts: 599
Joined: Fri Nov 27, 2009 8:23 pm

Re: ZnSe focus lens

Postby Exsecratio » Thu Mar 21, 2013 2:39 pm

So is just about everything Rob,even water is sufficient levels of ingestion.

For industrial purposes materials / chemicals have an LD50 rating. a figure at which such a level of poisoning with result in the death of 50% of those affected.(the median mortality rate or Lethal Dose rate)

It's usually expressed in weight of chemical per unit of body mass, for example Caffiene is around 150 Mg per KG of body mass (about 100 cups in a day)

For ZnSe it's 5,000 Mg per KG. It's thermal breakdown only occurs above 400 degrees C and at that point it produces irritant fumes.

If you need gloves to handle lens's then your going to need a full NBC suit along with a HazMat team to open a jar of coffee :)

best wishes

Dave
Exsecratio
 
Posts: 3
Joined: Thu Mar 21, 2013 1:17 pm


Return to Safety

Who is online

Users browsing this forum: No registered users and 2 guests