jtansoon wrote:Hi,
I'm looking to build myself a OrdBot printer from scratch. Anyone wishing to do the same and willing to share the cost of the parts. What I have found out so far are
1. Laser Cut parts for the OrdBot in 3mm 6061 T6 Almum (all parts)
2. V Wheel Assy (14 per set)
3 Idler Pully Assy (2 per set)
4. 2040 extrusion @ 370mm x 1
5. Makerslide 330 mm x 3 + 420 mm x 1
The estimated cost to get these parts is about US$200 each for 10 sets.
I have not found out the price to anodised the alum parts or to polish them shine. Or other parts like leadscrew, coupler, etc
Let me know if anyone is interested to share this...need 9 other person to make it work
thanks for reading.
So its $200 for everything highlighted below, correct? (including the extruder carriage? Since its not a flat plate wondering if this is included too).
It looks like you would have to add a lot of parts to finish it (it would have to be less than $200 for the rest for it to be worth it, really - ATI sells a full kit for $439). Let me know what your plan is for the rest of the bot and if you are able to get a good price for it, will be difficult though.
(2) A_6T16M020DF6005 PULLEY MXL 20 TOOTH 5mm BORE
(4) B10-10007 Stepper Motor, NEMA 17, Single Shaft 200 1.8D
(3) B14011 Motor Bracket (plain polished aluminum)(2) B14013 Idler Pulley Plate (plain polished aluminum)(3) B17022-330 MakerSlide 330mm Long(1) B17022-420 MakerSlide 420mm Long(3) B17049 Bot Foot
(2) B17055 Nut Block
(6) B18001-001 Eccentric Spacer
(2) B18031 3/8-12 Lead screw with Delrin Nut
(2) B28045 Shaft Coupler 5mm x 8mm
(1) B28046-388 MXL Belt 1/4 Wide 388 Tooth
(1) B28046-475 MXL Belt 1/4 Wide 475 Tooth
(14) B30037 Dual Bearing V Wheel Assy(2) B30041 Smooth Idler Pulley Assy(2) B30057 "Belt Clamp, Kit"
(11) BHCSM506S Button Head Cap Screw M5 x 6mm
(20) BHCSM508S Button Head Cap Screw M5 x 8mm
(14) BHCSM512S Button Head Cap Screw M5 x 12mm
(12) BHCSM530S Button Head Cap Screw M5 x 30mm
(2) C14012 Gantry Carriage Bracket (plain polished aluminum)(1) C14014 Extruder Carriage (plain polished aluminum)(1) C17056 Handle/Controller Plate (plain polished aluminum)(1) C17057 Carraige Plate, Hadron (plain polished aluminum)(4) HBLSD5 "Misumi Thin Bracket, 2 wide"
(1) HFSF5-2040-370 "Misumi 2040 Extrusion 3 Side Slots, 370mm"(2) HFC5-2040-B Misumi 2040 Cap, Black
(3) HNKK5-4 M4 T-SLOT NUT
(38) HNKK55 M5 T-SLOT NUT
(16) HNM5NL Hex Nut M5 Nylon Locking
(12) SHMSM304S Socket Heat Mach Screw M3 x 4mm
(4) SHMSM345S Socket Head Machine Screw M3x45mm
(3) SHSSM416S Socket Heat Set Screw M4 x 16mm
(4) SPACER_115_250_1500 SPACER .115D .250DIA 1.500LG
(2) SPACER_192_312_125 SPACER .192ID .312DIA .125LG
(8) SPACER_192_312_250 SPACER .192ID .312DIA .250LG