3d printed plastic components

Questions, Suggestions, Tips, Etc

Re: 3d printed plastic components

Postby kbob » Fri Jun 28, 2013 7:29 am

zachjowi wrote:care to share your files? I want to print the parts on my rep2


I got most of my parts from kenho. He put them up on Thingiverse here.
http://www.thingiverse.com/thing:31147

I put the laser tube brackets onto Thingiverse too.
http://www.thingiverse.com/thing:33579
Bob
"If you didn't code it, it will never own you." (-:
kbob
 
Posts: 151
Joined: Mon Jul 09, 2012 6:39 am
Location: Eugene, OR, US

Re: 3d printed plastic components

Postby zachjowi » Sun Jul 07, 2013 1:54 am

what percent infill did you use and how many shells, etc.

thanks
zachjowi
 
Posts: 27
Joined: Tue May 07, 2013 1:13 pm

Re: 3d printed plastic components

Postby kbob » Sun Jul 07, 2013 2:58 am

zachjowi wrote:what percent infill did you use and how many shells, etc.

thanks


I do not remember, sorry. I made those parts last winter, before I had my own printer. The brackets that holds the Z motor, the Z pulleys, and the idlers need to be fairly strong, but the rest can be lightweight.
Bob
"If you didn't code it, it will never own you." (-:
kbob
 
Posts: 151
Joined: Mon Jul 09, 2012 6:39 am
Location: Eugene, OR, US

Previous

Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 1 guest