Pronterface does not print

Topics Related to the ORD Bot Printer

Re: Pronterface does not print

Postby flurin » Thu Aug 01, 2013 2:57 am

syldcru wrote:I am now receiving this error from pronterface, Repetier Host does not give me an error but does not move my axis. Which I was able to do yesterday..


Remote support is quite difficult and time-consuming if it is based on assumptions and imaginations. I don't know, what you did since the last Configuration.h above! The best is if you can get help from somebody at your home.
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

Re: Pronterface does not print

Postby syldcru » Thu Aug 01, 2013 1:08 pm

Flurin,


I am a total newbie when it comes to 3d printers. I figured out why I was unable to extrude any filament, I had to flip the stepper driver motor connection around.

Could you help me with the following.

get the most updated marlin firmware.

What is the best way to calibrate the extruder. is this a good site
http://richrap.blogspot.com/2012/01/sli ... s-and.html

I REALLY appreciate your help.
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Pronterface does not print

Postby flurin » Thu Aug 01, 2013 1:31 pm

syldcru wrote:Flurin,
I am a total newbie when it comes to 3d printers. I figured out why I was unable to extrude any filament, I had to flip the stepper driver motor connection around.


Okay, let's try again.

Please report your changes in Configurations.h, so I can see your latest settings (Upload using Upload attachment)
Try to post your changes exactly step by step.
Upload pitctures of your 3D Printer, so we can see the position of your endstops and as many details as possible.

syldcru wrote:Could you help me with the following.

get the most updated marlin firmware.


The Marlin Firmware is a "work-in-progress" that means the firmware files may change every day. Just download the Firmware again here (as soon your Printer works, you don't need to update the firmware every day!):

https://github.com/ErikZalm/Marlin

syldcru wrote:What is the best way to calibrate the extruder. is this a good site
http://richrap.blogspot.com/2012/01/sli ... s-and.html


Yes, it is.
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

Re: Pronterface does not print

Postby syldcru » Thu Aug 01, 2013 9:59 pm

The changes that was made was what you told me to change.

Code: Select all
#ifndef CONFIGURATION_H
#define CONFIGURATION_H

// This configurtion file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration

//User specified version info of this build to display in [Pronterface, etc] terminal window during startup.
//Implementation of an idea by Prof Braino to inform user that any changes made
//to this build by the user have been successfully uploaded into firmware.
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" //Who made the changes.

// SERIAL_PORT selects which serial port should be used for communication with the host.
// This allows the connection of wireless adapters (for instance) to non-default port pins.
// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
#define SERIAL_PORT 0

// This determines the communication speed of the printer
#define BAUDRATE 250000
//#define BAUDRATE 115200

//// The following define selects which electronics board you have. Please choose the one that matches your setup
// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
// 11 = Gen7 v1.1, v1.2 = 11
// 12 = Gen7 v1.3
// 13 = Gen7 v1.4
// 3  = MEGA/RAMPS up to 1.2 = 3
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Bed, Fan)
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
// 4  = Duemilanove w/ ATMega328P pin assignment
// 5  = Gen6
// 51 = Gen6 deluxe
// 6  = Sanguinololu < 1.2
// 62 = Sanguinololu 1.2 and above
// 63 = Melzi
// 64 = STB V1.1
// 7  = Ultimaker
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
// 8  = Teensylu
// 80 = Rumba
// 81 = Printrboard (AT90USB1286)
// 82 = Brainwave (AT90USB646)
// 9  = Gen3+
// 70 = Megatronics
// 701= Megatronics v2.0
// 702= Minitronics v1.0
// 90 = Alpha OMCA board
// 91 = Final OMCA board
// 301 = Rambo

#ifndef MOTHERBOARD
#define MOTHERBOARD 33
#endif

// This defines the number of extruders
#define EXTRUDERS 1

//// The following define selects which power supply you have. Please choose the one that matches your setup
// 1 = ATX
// 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)

#define POWER_SUPPLY 1

//===========================================================================
//=============================Thermal Settings  ============================
//===========================================================================
//
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
//
//// Temperature sensor settings:
// -2 is thermocouple with MAX6675 (only for sensor 0)
// -1 is thermocouple with AD595
// 0 is not used
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
// 3 is mendel-parts thermistor (4.7k pullup)
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
//
//    1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
//                          (but gives greater accuracy and more stable PID)
// 51 is 100k thermistor - EPCOS (1k pullup)
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)

#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_BED 1

// Actual temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10  // (seconds)
#define TEMP_HYSTERESIS 3       // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW     1       // (degC) Window around target to start the recidency timer x degC early.

// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5
#define BED_MINTEMP 5

// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275
#define BED_MAXTEMP 150

// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4

// PID settings:
// Comment the following line to disable PID and enable bang-bang.
#define PIDTEMP
#define BANG_MAX 256 // limits current to nozzle while in bang-bang mode; 256=full current
#define PID_MAX 256 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 256=full current
#ifdef PIDTEMP
  //#define PID_DEBUG // Sends debug data to the serial port.
  //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                  // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  #define PID_INTEGRAL_DRIVE_MAX 255  //limit for the integral term
  #define K1 0.95 //smoothing factor withing the PID
  #define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine

// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
    #define  DEFAULT_Kp 22.2
    #define  DEFAULT_Ki 1.08
    #define  DEFAULT_Kd 90

// Makergear
//    #define  DEFAULT_Kp 7.0
//    #define  DEFAULT_Ki 0.1
//    #define  DEFAULT_Kd 12

// Mendel Parts V9 on 12V
//    #define  DEFAULT_Kp 63.0
//    #define  DEFAULT_Ki 2.25
//    #define  DEFAULT_Kd 440
#endif // PIDTEMP

// Bed Temperature Control
// Select PID or bang-bang with PIDTEMPBED.  If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
//
// uncomment this to enable PID on the bed.   It uses the same frequency PWM as the extruder.
// If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
// If your configuration is significantly different than this and you don't understand the issues involved, you proabaly
// shouldn't use bed PID until someone else verifies your hardware works.
// If this is enabled, find your own PID constants below.
//#define PIDTEMPBED
//
//#define BED_LIMIT_SWITCHING

// This sets the max power delived to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
// setting this to anything other than 256 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
#define MAX_BED_POWER 256 // limits duty cycle to bed; 256=full current

#ifdef PIDTEMPBED
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, argressive factor of .15 (vs .1, 1, 10)
    #define  DEFAULT_bedKp 10.00
    #define  DEFAULT_bedKi .023
    #define  DEFAULT_bedKd 305.4

//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
//    #define  DEFAULT_bedKp 97.1
//    #define  DEFAULT_bedKi 1.41
//    #define  DEFAULT_bedKd 1675.16

// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED



//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
//can be software-disabled for whatever purposes by
#define PREVENT_DANGEROUS_EXTRUDE
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
#define PREVENT_LENGTHY_EXTRUDE

#define EXTRUDE_MINTEMP 170
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.

//===========================================================================
//=============================Mechanical Settings===========================
//===========================================================================

// Uncomment the following line to enable CoreXY kinematics
// #define COREXY

// corse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors

#ifndef ENDSTOPPULLUPS
  // fine Enstop settings: Individual Pullups. will be ignord if ENDSTOPPULLUPS is defined
  #define ENDSTOPPULLUP_XMAX
  #define ENDSTOPPULLUP_YMAX
  #define ENDSTOPPULLUP_ZMAX
  #define ENDSTOPPULLUP_XMIN
  #define ENDSTOPPULLUP_YMIN
  //#define ENDSTOPPULLUP_ZMIN
#endif

#ifdef ENDSTOPPULLUPS
  #define ENDSTOPPULLUP_XMAX
  #define ENDSTOPPULLUP_YMAX
  #define ENDSTOPPULLUP_ZMAX
  #define ENDSTOPPULLUP_XMIN
  #define ENDSTOPPULLUP_YMIN
  #define ENDSTOPPULLUP_ZMIN
#endif

// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
//#define DISABLE_MAX_ENDSTOPS

// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
#define X_ENABLE_ON 0
#define Y_ENABLE_ON 0
#define Z_ENABLE_ON 0
#define E_ENABLE_ON 0 // For all extruders

// Disables axis when it's not being used.
#define DISABLE_X false
#define DISABLE_Y false
#define DISABLE_Z false
#define DISABLE_E false // For all extruders

#define INVERT_X_DIR false    // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false    // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false

// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN
#define X_HOME_DIR -1
#define Y_HOME_DIR -1
#define Z_HOME_DIR -1

#define min_software_endstops true //If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops true  //If true, axis won't move to coordinates greater than the defined lengths below.
// Travel limits after homing
#define X_MAX_POS 200
#define X_MIN_POS 0
#define Y_MAX_POS 200
#define Y_MIN_POS 0
#define Z_MAX_POS 150
#define Z_MIN_POS 0

#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)

// The position of the homing switches
//#define MANUAL_HOME_POSITIONS  // If defined, MANUAL_*_HOME_POS below will be used
//#define BED_CENTER_AT_0_0  // If defined, the center of the bed is at (X=0, Y=0)

//Manual homing switch locations:
#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 0

//// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)

// default settings

#define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7402,78.7402,2560,95.9}  // default steps per unit for ultimaker
#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 45}    // (mm/sec)
#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.

#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION  3000   // X, Y, Z and E max acceleration in mm/s^2 for r retracts

// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend.
// #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
// #define EXTRUDER_OFFSET_Y {0.0, 5.00}  // (in mm) for each extruder, offset of the hotend on the Y axis

// The speed change that does not require acceleration (i.e. the software might assume it can be done instanteneously)
#define DEFAULT_XYJERK                20.0    // (mm/sec)
#define DEFAULT_ZJERK                 0.4     // (mm/sec)
#define DEFAULT_EJERK                 5.0    // (mm/sec)

//===========================================================================
//=============================Additional Features===========================
//===========================================================================

// EEPROM
// the microcontroller can store settings in the EEPROM, e.g. max velocity...
// M500 - stores paramters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
//define this to enable eeprom support
//#define EEPROM_SETTINGS
//to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
// please keep turned on if you can.
//#define EEPROM_CHITCHAT

// Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180
#define PLA_PREHEAT_HPB_TEMP 70
#define PLA_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255

#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255

//LCD and SD support
//#define ULTRA_LCD  //general lcd support, also 16x2
//#define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)

//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
//#define ULTIPANEL  //the ultipanel as on thingiverse

// The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER

// The GADGETS3D G3D LCD/SD Controller (blue PCB)
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
//#define G3D_PANEL

// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

// The RepRapWorld REPRAPWORLD_KEYPAD v1.1
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
//#define REPRAPWORLD_KEYPAD
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click

//automatic expansion
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif

#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define ULTIPANEL
#define NEWPANEL
#endif

#if defined(REPRAPWORLD_KEYPAD)
  #define NEWPANEL
  #define ULTIPANEL
#endif

//I2C PANELS

//#define LCD_I2C_SAINSMART_YWROBOT
#ifdef LCD_I2C_SAINSMART_YWROBOT
  // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
  // Make sure it is placed in the Arduino libraries directory.
  #define LCD_I2C_TYPE_PCF8575
  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
  #define NEWPANEL
  #define ULTIPANEL
#endif

// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
//#define LCD_I2C_PANELOLU2
#ifdef LCD_I2C_PANELOLU2
  // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
  // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
  // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
  // Note: The PANELOLU2 encoder click input can either be directly connected to a pin
  //       (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  #define LCD_I2C_TYPE_MCP23017
  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
  #define NEWPANEL
  #define ULTIPANEL
#endif

// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
#ifdef LCD_I2C_VIKI
  // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
  // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
  // Note: The pause/stop/resume LCD button pin should be connected to the Arduino
  //       BTN_ENC pin (or set BTN_ENC to -1 if not used)
  #define LCD_I2C_TYPE_MCP23017
  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
  #define NEWPANEL
  #define ULTIPANEL
#endif

#ifdef ULTIPANEL
//  #define NEWPANEL  //enable this if you have a click-encoder panel
  #define SDSUPPORT
  #define ULTRA_LCD
  #ifdef DOGLCD // Change number of lines to match the DOG graphic display
    #define LCD_WIDTH 20
    #define LCD_HEIGHT 5
  #else
    #define LCD_WIDTH 20
    #define LCD_HEIGHT 4
  #endif
#else //no panel but just lcd
  #ifdef ULTRA_LCD
  #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
    #define LCD_WIDTH 20
    #define LCD_HEIGHT 5
  #else
    #define LCD_WIDTH 16
    #define LCD_HEIGHT 2
  #endif
  #endif
#endif

// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN

// M240  Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
// #define PHOTOGRAPH_PIN     23

// SF send wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX

// Support for the BariCUDA Paste Extruder.
//#define BARICUDA

/*********************************************************************\
*
* R/C SERVO support
*
* Sponsored by TrinityLabs, Reworked by codexmas
*
**********************************************************************/

// Number of servos
//
// If you select a configuration below, this will receive a default value and does not need to be set manually
// set it manually if you have more servos than extruders and wish to manually control some
// leaving it undefined or defining as 0 will disable the servo subsystem
// If unsure, leave commented / disabled
//
// #define NUM_SERVOS 3

#include "Configuration_adv.h"
#include "thermistortables.h"

#endif //__CONFIGURATION_H


The Changes to the config h file

Code: Select all
#ifndef MOTHERBOARD
#define MOTHERBOARD 33
#endif


Code: Select all
// This defines the number of extruders
#define EXTRUDERS 1


Code: Select all
// 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
#define POWER_SUPPLY 1


Code: Select all
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_BED 1


Code: Select all
I used the M303 command to average my PID

bias: 61 d: 61 min: 147.36 max: 153.04
>>>M303
SENDING:M303
Setting hotend temperature to 230.000000 degrees Celsius.
bias: 57 d: 57 min: 147.60 max: 152.61
Ku: 28.98 Tu: 33.03
Clasic PID
Kp: 17.39
Ki: 1.05
Kd: 71.79
bias: 57 d: 57 min: 147.60 max: 152.54
Ku: 29.38 Tu: 32.51
Clasic PID
Kp: 17.63
Ki: 1.08
Kd: 71.62
>>>M303
SENDING:M303
bias: 57 d: 57 min: 147.80 max: 152.39
Ku: 31.61 Tu: 32.24
Clasic PID
Kp: 18.97
Ki: 1.18
Kd: 76.45
PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h
PID Autotune start
>>>M303
SENDING:M303
bias: 59 d: 59 min: 148.00 max: 156.85
bias: 62 d: 62 min: 147.19 max: 152.39
bias: 55 d: 55 min: 148.43 max: 152.83
Ku: 31.82 Tu: 28.97
Clasic PID
Kp: 19.09
Ki: 1.32
Kd: 69.14
bias: 56 d: 56 min: 148.80 max: 151.30
Ku: 56.94 Tu: 23.59
Clasic PID
Kp: 34.17
Ki: 2.90
Kd: 100.76
bias: 48 d: 48 min: 147.80 max: 153.04
Ku: 23.31 Tu: 31.72
Clasic PID
Kp: 13.99
Ki: 0.88
Kd: 55.46
PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h
PID Autotune start
>>>M303
SENDING:M303
bias: 55 d: 55 min: 148.43 max: 157.62
Setting bed temperature to 110.000000 degrees Celsius.
bias: 55 d: 55 min: 147.74 max: 152.39
bias: 57 d: 57 min: 148.00 max: 151.96
Ku: 36.69 Tu: 29.75
Clasic PID
Kp: 22.01
Ki: 1.48
Kd: 81.86
bias: 54 d: 54 min: 148.40 max: 151.96
Ku: 38.66 Tu: 28.70
Clasic PID
Kp: 23.20
Ki: 1.62
Kd: 83.24
bias: 52 d: 52 min: 148.58 max: 152.01
Ku: 38.54 Tu: 30.15
Clasic PID
Kp: 23.12
Ki: 1.53
Kd: 87.14
PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h
PID Autotune start
>>>M303
SENDING:M303
bias: 56 d: 56 min: 148.60 max: 156.44
bias: 56 d: 56 min: 147.40 max: 152.39
bias: 54 d: 54 min: 148.20 max: 152.17
Ku: 34.60 Tu: 31.33
Clasic PID
Kp: 20.76
Ki: 1.33
Kd: 81.30
bias: 54 d: 54 min: 148.20 max: 151.96
Ku: 36.61 Tu: 32.38
Clasic PID
Kp: 21.96
Ki: 1.36
Kd: 88.88
bias: 54 d: 54 min: 148.00 max: 152.02
Ku: 34.17 Tu: 31.59
Clasic PID
Kp: 20.50
Ki: 1.30
Kd: 80.95
PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h
PID Autotune start
bias: 56 d: 56 min: 148.20 max: 157.17
bias: 56 d: 56 min: 147.39 max: 152.83
>>>M303
SENDING:M303
bias: 55 d: 55 min: 147.93 max: 152.61
Ku: 29.90 Tu: 33.69
Clasic PID
Kp: 17.94
Ki: 1.07
Kd: 75.55
bias: 54 d: 54 min: 147.74 max: 152.61
Ku: 28.23 Tu: 34.47
Clasic PID
Kp: 16.94
Ki: 0.98
Kd: 72.98
bias: 54 d: 54 min: 147.95 max: 152.39
Ku: 30.96 Tu: 33.42
Clasic PID
Kp: 18.58
Ki: 1.11
Kd: 77.61
PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h
>>>M303
SENDING:M303
PID Autotune start
bias: 58 d: 58 min: 148.15 max: 157.38
bias: 57 d: 57 min: 147.60 max: 152.61
bias: 56 d: 56 min: 147.80 max: 152.61
Ku: 29.66 Tu: 34.08
Clasic PID
Kp: 17.79
Ki: 1.04
Kd: 75.79
bias: 56 d: 56 min: 147.86 max: 152.17
Ku: 33.08 Tu: 33.16
Clasic PID
Kp: 19.85
Ki: 1.20
Kd: 82.26
bias: 56 d: 56 min: 147.80 max: 151.74
Ku: 36.20 Tu: 31.33
Clasic PID
Kp: 21.72
Ki: 1.39
Kd: 85.05
PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h

Code: Select all
// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
    #define  DEFAULT_Kp 22.2
    #define  DEFAULT_Ki 1.08
    #define  DEFAULT_Kd 90


Code: Select all
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.


Code: Select all
#define INVERT_X_DIR false    // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false    // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false



Code: Select all
// Travel limits after homing
#define X_MAX_POS 200
#define X_MIN_POS 0
#define Y_MAX_POS 200
#define Y_MIN_POS 0
#define Z_MAX_POS 150
#define Z_MIN_POS 0


Code: Select all
#define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7402,78.7402,2560,95.9}  // default steps per unit for ultimaker
#define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 45}    // (mm/sec)
#define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.




Code: Select all
// The speed change that does not require acceleration (i.e. the software might assume it can be done instanteneously)
#define DEFAULT_XYJERK                20.0    // (mm/sec)
#define DEFAULT_ZJERK                 0.4     // (mm/sec)
#define DEFAULT_EJERK                 5.0    // (mm/sec)




Pictures of end

Z min Endstop

Image

Xmin EndStop

Image
IMG_20130801_174104

Ymin Endstop
Image

Image



Pictures of the Printer

Image

Image

Image

Image
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Pronterface does not print

Postby syldcru » Fri Aug 02, 2013 2:52 pm

syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Pronterface does not print

Postby flurin » Fri Aug 02, 2013 5:40 pm

Great! is works.

One thing you should learn is how to upload files.

Use the Upload attachment tab ...
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

Re: Pronterface does not print

Postby syldcru » Sat Aug 03, 2013 12:43 am

I am unsure whats going on! today when I tried to print again the xmin axis endstop was triggered and the printer died. how can i configure the endstops to act as a stop and not shut the printer down?

flurin wrote:Great! is works.

One thing you should learn is how to upload files.

Use the Upload attachment tab ...
Last edited by syldcru on Sat Aug 03, 2013 1:46 am, edited 1 time in total.
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Pronterface does not print

Postby syldcru » Sat Aug 03, 2013 1:10 am

I just realized that by default Repetier Host has 10mm when I start it up on the X and Y axis.. How can I correct this?

print.jpg
syldcru
 
Posts: 31
Joined: Fri Jul 05, 2013 1:30 am

Re: Pronterface does not print

Postby flurin » Sat Aug 03, 2013 3:53 am

I've uploaded a Configuration.h I used.

Configuration.h
(24.21 KiB) Downloaded 1272 times


Compare this with your Configuration.h and upload your current Configuration.h (the file that you used to upload to the Arduino) to buildlog.net in the same way I did.
User avatar
flurin
 
Posts: 203
Joined: Mon Feb 27, 2012 12:09 pm
Location: Switzerland

Re: Pronterface does not print

Postby blah_59 » Sat Aug 03, 2013 1:00 pm

Syldcru,

The 10mm in X and Y are placeholder values that don't mean anything. Repetier is waiting for you to "Home" the printer so it knows exactly where the print head is so it can put meaningful values in X, Y and Z.

The first step is to get the "Home" button to do what it's supposed to do. If it doesn't work right now, try to home each axis individually and make sure each axis moves to the home position. If it doesn't work, test each axis individually, it's easier to stay focused and it doesn't get confusing that way.

Individual axis settings:
If one axis doesn't move toward "Home" when you push the "home" button, invert the logic in configuration.h (change from true to false OR change from false to true) for that axis in this section:

#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true

If an axis doesn't move at all when you push the "Home" button, it's probably a limit switch issue so hold/trigger the limit switch with your finger and push the "Home" button again to verify. If the axis moves when you're holding the limit switch then invert the logic for that axis in configuration.h in this section:

const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.

I hope this helps.
blah_59
 
Posts: 158
Joined: Wed Aug 29, 2012 10:08 am

PreviousNext

Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 27 guests

cron