Laser cut of carbon sheet

General discussion of laser machines

Laser cut of carbon sheet

Postby fma » Wed Oct 02, 2013 7:00 am

Hi!

Is it possible to laser cut a carbon sheet, like those used for quads or so?

Does it require powerfull laser?

Thanks,
Frédéric
fma
 
Posts: 213
Joined: Mon Aug 20, 2012 7:53 am

Re: Laser cut of carbon sheet

Postby Speedythinker » Thu Oct 03, 2013 1:41 am

If you have a sample, send it to me and I can run a test for you.
I have 100W and 40W system standby for testing

Marco
Lightobject.com
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Laser cut of carbon sheet

Postby Guldberg » Thu Oct 03, 2013 3:06 pm

Nope. Tried it, its a no-go even on 150w
Guldberg
 
Posts: 15
Joined: Sun Mar 06, 2011 8:40 pm

Re: Laser cut of carbon sheet

Postby bdring » Thu Oct 03, 2013 4:26 pm

One of my suppliers says he has seen it done on really big lasers of like a 1000 watts. He has been cutting FR4 for me lately, which I previously thought was impossible. It darkens the edge, so he uses black FR4. Most people water jet cut carbon fiber.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Laser cut of carbon sheet

Postby cvoinescu » Thu Oct 03, 2013 7:10 pm

What's the standard method for FR4, then, milling? Or waterjet too?
cvoinescu
 
Posts: 501
Joined: Thu Aug 09, 2012 9:12 am
Location: Camberley, Surrey, UK

Re: Laser cut of carbon sheet

Postby macona » Fri Oct 04, 2013 5:00 am

FR4 is usually routed or milled out. We just machined a bunch at work. Smells pretty bad.
macona
 
Posts: 363
Joined: Tue Aug 17, 2010 10:30 pm


Return to General

Who is online

Users browsing this forum: No registered users and 8 guests

cron