Gantry ends for the 2.x

CNC/Laser Related Items Only Please

Re: Gantry ends for the 2.x

Postby imacav8r » Wed Feb 05, 2014 2:23 pm

rsm5178 wrote:I am having one set of gantry ends, z table lift plates, and lens carriage plates cut & bent for myself (along with all the ORD Bot Hadron plates... because I'm feeling ambitious).

I can update on the price when I get them later this week if it would help anyone. They are mill finish.

-Rich


Yes! i would love to source the same parts for the 2.X please let us know.
imacav8r
 
Posts: 3
Joined: Fri Jan 03, 2014 3:25 pm

Re: Gantry ends for the 2.x

Postby jonquinn » Sat Feb 08, 2014 3:55 pm

I would also be interested if you have enough made
Jon
jonquinn
 
Posts: 11
Joined: Sun Jan 05, 2014 4:47 am

Re: Gantry ends for the 2.x

Postby rsm5178 » Fri Feb 14, 2014 1:54 am

Update:

Parts are delayed because of the amount of winter and the lack of electricity in the area. Suppose I should spend time with the girlfriend tomorrow too...

What I have received are the material and cutting costs for the gantry ends, lens carriage plate, and z table lifting plates. Based on these, I estimate a final price at around +/-$60 for this set (gantry ends still need to be bent). Both of the shops I am using have no minimum order quantity. Hoping to see them this weekend or early next week.

-Rich
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: Gantry ends for the 2.x

Postby rsm5178 » Fri Feb 28, 2014 4:14 am

I finally received my bent parts today for the 2.x. The cutting is dead on within 0.001". The critical dimensions for the gantry bends came back .050"-.060" off at worst, .007" off at best. Overall, I think that they turned out pretty well.

If anyone wants me to source them these parts, let me know. With what I have paid, plus a little gas money, and a cut for Bart the price for the following would be $60 plus shipping. All are mill finish:

Left Gantry End
Right Gantry End
Lens Carriage Plate
Z Table Lift Plate (x4)

I also had three (3) Hadron printer sets made if anyone is interested in them. $90 plus shipping. Mill finish
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: Gantry ends for the 2.x

Postby imacav8r » Fri Feb 28, 2014 5:02 pm

rsm5178 wrote:I finally received my bent parts today for the 2.x. The cutting is dead on within 0.001". The critical dimensions for the gantry bends came back .050"-.060" off at worst, .007" off at best. Overall, I think that they turned out pretty well.

If anyone wants me to source them these parts, let me know. With what I have paid, plus a little gas money, and a cut for Bart the price for the following would be $60 plus shipping. All are mill finish:

Left Gantry End
Right Gantry End
Lens Carriage Plate
Z Table Lift Plate (x4)

I also had three (3) Hadron printer sets made if anyone is interested in them. $90 plus shipping. Mill finish



PM sent. i want a set.
imacav8r
 
Posts: 3
Joined: Fri Jan 03, 2014 3:25 pm

Re: Gantry ends for the 2.x

Postby jonquinn » Sat Mar 01, 2014 2:16 am

Here too for 2.X parts. PM sent.
jonquinn
 
Posts: 11
Joined: Sun Jan 05, 2014 4:47 am

Previous

Return to For Sale and Wanted

Who is online

Users browsing this forum: No registered users and 10 guests

cron