Chooch's 3D printable laser cutter

Post your build logs here

Re: Chooch's 3D printable laser cutter

Postby trwalters001 » Mon Jul 25, 2011 10:45 pm

This is a great idea!

However, if you use 2 line-generator lasers, 90 degrees to each other, they'll cross at the focal point whatever distance you're focusing at.

Tim
trwalters001
 
Posts: 173
Joined: Sun Oct 24, 2010 10:08 pm
Location: Atlanta, GA

Re: Chooch's 3D printable laser cutter

Postby bdring » Mon Jul 25, 2011 11:13 pm

The idea is to use dots. This way it will also allow you to set the focal length too. Cross hairs only work in 2 dimensions.

There is only one point in 3D space where the dots overlap.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Chooch's 3D printable laser cutter

Postby Hassi » Tue Jul 26, 2011 9:29 pm

hi, i tryed to combine each idea of you.
ended with this:
Crosshairwithpointer.jpg


its only shematic ;-)
Hassi
 
Posts: 19
Joined: Mon Jul 18, 2011 10:59 am
Location: Bavaria, Germany

Re: Chooch's 3D printable laser cutter

Postby bdring » Tue Jul 26, 2011 10:06 pm

Two lines and a dot? I guess that would work.

One of the features of the two dots method comes into play if the beams are at a 45 degree angle. The distance between the dots is equal to the distance away from the focal point. Sometimes I like to focus below the surface at the middle. This could help you quickly estimate the middle.

The two lines and a dot might have a similar affect, but you do not need to converge the dots first. The crossed lines will give you the XY and the dot gives the distance to the Z.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Chooch's 3D printable laser cutter

Postby trwalters001 » Wed Jul 27, 2011 2:30 pm

Bart wrote:The distance between the dots is equal to the distance away from the focal point.

Never thought of that...

*THIS* is why you get paid the big bucks! :lol:
trwalters001
 
Posts: 173
Joined: Sun Oct 24, 2010 10:08 pm
Location: Atlanta, GA

Re: Chooch's 3D printable laser cutter

Postby iGull » Mon Sep 19, 2011 12:12 pm

Hi

bdring wrote:The distance between the dots is equal to the distance away from the focal point.


Hadn't read this log before - this is the system that the 'Dambusters' used in WWII :D

Checkout ...

http://en.wikipedia.org/wiki/File:Dambstrajj.gif

I guess a pair of lasers would have been slightly more accurate !

Cheers

Neil
EMOs are a sign of weakness ...
iGull
 
Posts: 171
Joined: Mon Dec 06, 2010 2:59 pm
Location: Edinburgh, Scotland

Previous

Return to Build Logs

Who is online

Users browsing this forum: No registered users and 5 guests

cron